Abstract:Since the demands for lowering the burdens on the environment will continue to grow steadily, understanding of pollutant emission characteristics becomes more and more important to minimize environmental disruption. These pollutant emission conditions cannot be estimated in real-time using conventional mass-based methods because of their low concentrations in air or exhaust gases. Therefore, new evaluation criteria are required for better understanding of their characteristics. In this study, the laser breakdown time-of-flight mass spectrometry was developed and applied to hydrocarbons to detect the elemental composition of gas phase materials. The laser wavelength dependence of this method was evaluated using 1064 and 266nm laser outputs. Signals from fragments of hydrocarbons appeared using 266nm. On the other hand, it was found that the mass spectra of atoms can be detected using the 1064nm laser breakdown process without intermediate fragment signals. This feature is important to detect atomic signals of the measured materials without the interference of fragmentations. The pressure effect was also evaluated to enhance the detection limit. The higher pressure tends to induce the higher atomic signals. The detection limit can easily reach to ppb or less. The signal intensity was proportional to the concentration of hydrocarbons introduced. The method was applied to various hydrocarbons and the breakdown characteristics of these molecules were taken for the quantitative analysis. Compared with conventional measurements, this method has a lot of merits of the simple signal analysis, real-time and sensitive detection features. The method can cover various industrial applications including the exhaust analysis of combustors, environmental monitoring of air, and plant monitoring for safety and security.

Breakdown Pattern of Hydrocarbons by Laser Breakdown Time-of-flight Mass Spectrometry

Laser Wavelength and Pressure Dependence of Laser Breakdown Time-of-Flight Mass Spectrometry

Quantitative Analysis of Cadmium and Zinc in Algae Using Laser-Induced Breakdown Spectroscopy

Rapid Detection of Mercury and Iodine Using Laser Breakdown Time-of-Flight Mass Spectrometry

Characterization of the Bag Breakup of Liquid Drop Using High-Speed Digital In-Line Holography

[Experimental Investigation of Atmosphere and Water Vapor with Laser Induced Breakdown Spectroscopy].

Comparison of the detection characteristics of trace species using laser-induced breakdown spectroscopy and laser breakdown time-of-flight mass spectrometry

Heavy metals in the atmosphere determination by double-pulse laser induced breakdown spectroscopy

Spectroscopic study on the laser-induced breakdown flame plasma

Laser-Induced Breakdown Spectroscopy and Shadowgraphy of Acoustically Levitated Heptane Droplets

Spectroscopic Study on the Time Evolution Behaviors of the Laser-Induced Breakdown Air Plasma

Comparison study of two commercial spectrometers for heavy metal analysis of laser induced breakdown spectroscopy (LIBS)

Study on Measurement of Trace Heavy Metal Ni in Water by Laser Induced Breakdown Spectroscopy Technique

Heavy metal detection in soil using a mobile laser induced breakdown spectroscopy system

Laser-induced Breakdown Spectroscopy of Liquid Solutions: a Comparative Study on the Forms of Liquid Surface and Liquid Aerosol.

Laser-induced Breakdown Spectroscopy Detection of Heavy Metal in Water Based on Graphite Conch Method

Elemental Analysis Technique Based on Laser Induced Breakdown Spectroscopy

Detection of heavy metals in water sample by laser-induced breakdown spectroscopy combined with annular groove graphite flake

Double-pulse neodymium YAG/Carbon dioxide laser-induced breakdown spectroscopy for excitation of bulk and trace analytes

Application of Molecular Emissions in Laser-Induced Breakdown Spectroscopy: A Review

Time-Resolved Laser-Induced Breakdown Spectroscopy of Aluminum