Abstract:Thermal conductivity of SiCp/Cu composites was usually far below the expectation, which is usually attributed to the low real thermal conductivity of matrix. In the present work, highly pure Cu matrix composites reinforced with acid washed SiC particles were prepared by the pressure infiltration method. The interfacial microstructure of SiCp/Cu composites was characterized by layered interfacial products, including un-reacted SiC particles, a Cu-Si layer, a polycrystalline C layer and Cu-Si matrix. However, no Cu3Si was found in the present work, which is evidence for the hypothesis that the formation of Cu3Si phase in SiC/Cu system might be related to the alloying elements in Cu matrix and residual Si in SiC particles. The thermal conductivity of SiCp/Cu composites was slightly increased with the particle size from 69.9 to 78.6 W/(m K). Due to high density defects, the real thermal conductivity of Cu matrix calculated by H-J model was only about 70 W/(m K). The significant decrease in thermal conductivity of Cu matrix is an important factor for the low thermal conductivity of SiCp/Cu composites. However, even considered the significant decrease of thermal conductivity of Cu matrix, theoretical values of SiCp/Cu composites calculated by H-J model were still higher than the experimental results. Therefore, an ideal particle was introduced in the present work to evaluate the effect of interfacial thermal resistance. The reverse-deduced effective thermal conductivities of ideal particles according to H-J model was about 80 W/(m K). Therefore, severe interfacial reaction in SiCp/Cu composites also leads to the low thermal conductivity of SiCp/Cu composites. (C) 2014 Elsevier Ltd. All rights reserved.

Preparation and Thermal-Physical Properties of Three Dimensional Bicontinuous SiC/Cu-Si Composite

Thermophysical Properties of SiC/Al Composites with Three Dimensional Interpenetrating Network Structure

Preparation and Thermophysical Properties of Directional SiC/Cu–Si Composite Via Spontaneous Infiltration

Effects of SiC Content on the Mechanical and Thermophysical Properties of 3D Cf/SiC–Al Composites

Effect of preform structure on mechanical and thermal properties of SiCf/SiC composites

Reactions Mechanism and Mechanical Properties of a SiCf/SiC Joint Affected by Cu/Ni/Ti Elements and Inhomogeneous Composites

Fabrication of 3D-SiC/aluminum alloy interpenetrating composites by DIW and pressureless infiltration

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

The structural effect of SiC form ceramic on the compressive strength and thermal expansion properties of Cu–SiC composites

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Mechanical and ablation properties of 3D orthogonal woven C/C-SiC composite based on high-solid-loading slurry impregnation

Construction of novel plate-shaped 4H–SiC network skeleton for enhancing 3D-interpenetrated network structure SiC/Al composites

Microstructure and Mechanical Properties of Three Dimensional Cf/SiC-ZrC-ZrB2 Composites Prepared by Reactive Melt Infiltration Method

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

Interfacial microstructure and its effect on thermal conductivity of SiCp/Cu composites

Preparation and Mechanical Behaviors of SiOC-modified Carbon-Bonded Carbon Fiber Composite with In-Situ Growth of Three-Dimensional SiC Nanowires

Tailoring the thermophysical properties of porous SiC framework reinforced Al-Mg-Si composites by Si alloying content for thermal energy management

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering