Abstract:Alloys based on titanium and aluminum with additions of niobium and rare-earth metals have unique mechanical and heat-resistant properties, and also it likely that such alloys would have increased corrosion resistance. The method of thermodynamic modeling using the HSC program was used to study a system with aluminum consumption varying in the range from 0 to 100% of the mass of the initial charge. The features of phase formation in Al–[50TiO2–5Nb2O5–1Y2O3 (Gd2O3)] systems have been studied. The calculation of the heat balance of the process at 1600°C and 44% of Al was – 0.196 MJ per 1 kg of charge, which indicates the possibility of its occurrence with only the aluminothermic reactions. The reduction of titanium and niobium can proceed by reactions through the formation of their oxides of lower valency – TiO, NbO2, NbO. The aluminothermic reduction of gadolinium is thermodynamically possible only at temperatures below 1200°C. The reduction of yttrium through the interaction of Y2O3 with aluminum with the formation of AlY, Al2Y3 AlY2 compounds for the range of 1000–1800°C is thermodynamically impossible. The results of thermodynamic modeling of interactions correlated well with the data of differential thermal and X-ray phase analysis using STA 449 F3 Jupiter (NETZSCH) synchronous thermal analysis and XRD-7000 diffractometer (Shimadzu) with automatic program control, respectively. It was found that the process enters the active phase after the appearance of liquid aluminum and, apparently, is accompanied by exothermic effects with the formation of double and triple intermetallic compounds of aluminum with rare (Nb, Ti) and rare earth (Gd, Y) metals. Transformation of titanium dioxide and niobium pentoxide in the process of transformations is likely carried out through successive and parallel stages of formation of simple and complex oxides with low oxidation states. At the initial stages of the interaction of aluminum with oxides, niobium and titanium aluminides are mainly formed. At subsequent stages, the formation of more complex compounds is observed. At temperatures above 1300°C, ternary intermetallic compounds Al43Nb4Gd6, Ti4Al20Gd and Ti4Al3Y6, Al3Ti, Al0.23Nb0.07Ti0.7 are formed. Gadolinium and yttrium tend to form complex intermetallic compounds in such systems.

Topotactic reduction and reoxidation of hexagonal RCu 0.5 Ti 0.5 O 3 (R=Y, Eu-Lu) Phases

Redox Properties of Hexagonal and Cubic Sr 0.4 Ba 0.6 Mn 0.94 Ti 0.06 O 3−δ Investigated by In Situ Neutron Powder Diffraction

Small-moment paramagnetism and extensive twinning in the topochemically reduced phase Sr2ReLiO5.5

Thermolytic Formation Of Iro2+Ta2o5 Mixed Oxides Anodes Made From Chloride Precursors

Magnetic, electrical and structural properties of the new Re-doped ruthenocuprate Ru1-xRexSr2GdCu2Oy

PHASE FORMATION DURING ALUMINOTHERMAL REDUCTION OF Ti, Nb, Gd (Y) FROM OXIDES

Element Substitution Effect in Transition Metal Oxypnictide Re(O1-Xfx)Tas (re=rare Earth, T=Transition Metal)

Electrocatalytic Activities of REMn2O5 (RE = Dy, Ho, Er, Tm, Yb, and Lu) and Er0.76Zr 0.11ca0.13mn2o5 for Oxygen Reduction in Alkaline Solution

Discovery of a reversible redox-induced order-disorder transition in a 10-cation compositionally complex ceramic

Electronic-structure Evolution of SrFeO3-xduring Topotactic Phase Transformation.

Elemental effects on the oxidation of refractory compositionally complex alloys

Orthorhombic to tetragonal polymorphic transformation of YTa<sub>3</sub>O<sub>9</sub> and its inhibition through the design of high-entropy (Y<sub>0.2</sub>La<sub>0.2</sub>Ce<sub>0.2</sub>Nd<sub>0.2</sub>Gd<sub>0 .2</sub>) Ta<sub>3</sub>O<sub>9</sub>

Topotactic Transition: A Promising Opportunity for Creating New Oxides

Cation and anion topotactic transformations in cobaltite thin films leading to Ruddlesden-Popper phases

Redox Properties of Titanium Oxides on Pt3Ti

Study on the Structure and Reduction Behaviour of the Iron–zirconium Oxide System

Structual and Magnetic Properties of RMo1.5Fe10.5Nx

Effect of Y on the high-temperature oxidation behavior of CrMoTaTi refractory high entropy alloy

Enhanced Thermal Stability and Oxygen Storage Capacity for CexZr1-xO2 (x = 0.4−0.6) Solid Solutions by Hydrothermally Homogenous Doping of Trivalent Rare Earths

Structural evolution of epitaxial SrCoOx films near topotactic phase transition

Signature of Topological Semimetal in Harmonic-honeycomb ReO3