Three-dimensional upper-bound analysis for ultimate bearing capacity of laterally loaded rigid pile in undrained clay

jian yu,maosong huang,chenrong zhang

DOI: https://doi.org/10.1139/cgj-2014-0390

IF: 3.6

2015-01-01

Canadian Geotechnical Journal

Abstract:A new three-dimensional upper-bound combined failure mechanism is presented to analyze the lateral ultimate capacity of rigid piles embedded in various soil conditions, involving homogeneous soils, layered soils, and Gibson soils. The wedge curved failure surface function composed by rotating the Newton interpolation polynomial is adopted near the ground surface, and a plane strain collapse mechanism is employed at depth. Furthermore, the energy dissipation of the transition interface is introduced to keep a kinematically admissible velocity field between the wedge and the plane strain mechanism. An empirical equation is then proposed based on the upper-bound solutions for the homogeneous soils, and extended to the layered soils and Gibson soils. Meanwhile, the three-dimensional arbitrary Lagrangian-Eulerian (ALE) analysis is employed to investigate the distribution of limiting pressures along the pile shaft for different soil parameters. It is found that the upper-bound solutions based on the rigid-plastic assumption only exhibits a good agreement with the finite element (FE) results for a very high soil rigidity index of 10 000, due to a Possion's ratio of approximate but less than 0.5 in such a typical undrained FE analysis. For such a Possion's ratio, an inevitably slight elastic volumetric change induces the unexpected cavity flow at the deep section of the pile. It leads to the soil rigidity affecting the profile distribution of the bearing capacity, although it is not true for a real undrained analysis. Finally, a centrifuge test is analyzed by the upper-bound method to further testify the rationality of the new failure mechanism.