Abstract:Large-area nanostructuring of glasses using intense laser beams is a challenging task due to the material's extreme non-linear absorption of laser energy. Precise optimization of the process parameters is essential for fabricating nanostructures with large-area coverage. In this study, we report the findings on creating high-spatial-frequency LIPSS (HSFL) on borosilicate glass through direct laser writing, using a femtosecond laser with a wavelength λ = 800 nm, pulse duration τ = 35 fs, and repetition frequency frep = 1 kHz. We measured the single-pulse ablation threshold and incubation factor of Borosilicate glasses to achieve high-precision control of the large-area surface structuring. Single-spot experiments indicated that, when there was higher fluence and a larger number of irradiated laser pulses, a melt formation inside the irradiated area limited the uniformity of LIPSS formation. Additionally, the orientation of the scan axis with the laser beam polarization was found to significantly influence the uniformity of LIPSS generated along the scan line, with more redeposition and melt formation when the scan axis was perpendicular to the laser beam polarization. For large-area processing, the borosilicate glass surface was scanned line-by-line by the laser beam, with a scan orientation parallel to the polarization of the laser. The optical characterization revealed that the transmittance and reflectance of the borosilicate glass decreased significantly after processing. Additionally, the surface's wettability changed from hydrophilic to super-hydrophilic after processing. These chemical contamination-free and uniformly distributed structures have potential applications in optics, microfluidics, photovoltaics, and biomaterials.

Taper Array in Silica Glass for Beam Splitting

Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Focused Ion Beam Lithography of Multiperiod Gratings for A Wavelength-Division-Multiplexed Transmitter Laser Array

Femtosecond laser-induced breakdown in distilled water for fabricating the helical microchannels array.

Multi-photon Fabrication of Two-Dimensional Periodic Structure by Three Interfered Femtosecond Laser Pulses on the Surface of the Silica Glass

Silica Λ-shape Wedge Arrays Fabrication and Interspace Tuning Via Hot Embossing and Sol–gel Replication

Controllable fabrication of periodic hexagon lattice on glass by interference of three replicas split from single femtosecond laser pulse

Fabrication of beam shapers in the bulk of fused silica by femtosecond laser pulses.

Silica Λ-shape wedge arrays fabrication and interspace tuning via hot embossing and sol-gel replication

Fabrication of high-aspect-ratio fused silica microstructures with large depths using Bessel-beam femtosecond laser-assisted etching

Fabrication Of Microfluidic Devices In Silica Glass By Water-Assisted Ablation With Femtosecond Laser Pulses

A Novel Optical Beam Splitter Based on Photonic Crystal with Hybrid Lattices

The fabrication of a 25x25 multiple beam splitter

Single-stage spin-orbit Laguerre-Gaussian modal beam shaping from silica optics

Versatile Route To Gapless Microlens Arrays Using Laser-Tunable Wet-Etched Curved Surfaces

Convex Silica Microlens Arrays Via Femtosecond Laser Writing.

Recoverable and rewritable waveguide beam splitters fabricated by tailored femtosecond laser writing of lithium tantalate crystal

Direct Femtosecond Laser Processing for Generating High Spatial Frequency LIPSS (HSFL) on Borosilicate Glasses with Large-Area Coverage

All-in-One Collimating Splitter Based on a Meta-Fiber Platform