Abstract:Shallow aquifer monitoring is likely to be a required aspect to any geologic CO2 sequestration operation. Collecting groundwater samples and analyzing for geochemical parameters such as pH, alkalinity, total dissolved carbon, and trace metals has been suggested by a number of authors as a possible strategy to detect CO2 leakage. The effectiveness of this approach, however, will depend on the hydrodynamics of the leak-induced CO2 plume and the spatial distribution of the monitoring wells relative to the origin of the leak. To our knowledge, the expected effectiveness of groundwater sampling to detect CO2 leakage has not yet been quantitatively assessed. In this study we query hundreds of simulations developed for the National Risk Assessment Project (US DOE) to estimate risks to drinking water resources associated with CO(2)leaks. The ensemble of simulations represent transient, 3-D multi-phase reactive transport of CO2 and brine leaked from a sequestration reservoir, via a leaky wellbore, into an unconfined aquifer. Key characteristics of the aquifer, including thickness, mean permeability, background hydraulic gradient, and geostatistical measures of aquifer heterogeneity, were all considered uncertain parameters. Complex temporally-varying CO2 and brine leak rate scenarios were simulated using a heuristic scheme with ten uncertain parameters. The simulations collectively predict the spatial and temporal evolution of CO2 and brine plumes over 200 years in a shallow aquifer under a wide range of leakage scenarios and aquifer characteristics.Using spatial data from an existing network of shallow drinking water wells in the Edwards Aquifer, TX, as one illustrative example, we calculated the likelihood of leakage detection by groundwater sampling. In this monitoring example, there are 128 wells available for sampling, with a density of about 2.6 wells per square kilometer. If the location of the leak is unknown a priori, a reasonable assumption in many cases, we found that the leak would be detected in at least one of the monitoring wells in less than 10% of the scenarios considered. This is because plume sizes are relatively small, and so the probability of detection decreases rapidly with distance from the leakage point. For example, 400m away from the leakage point there is less than 20% chance of detection.We then compared the effectiveness of groundwater quality sampling to shallow aquifer and/or reservoir pressure monitoring. For the Edwards Aquifer example, pressure monitoring in the same monitoring well network was found to be even less effective that groundwater quality monitoring. This is presumably due to the unconfined conditions and relatively high permeability, so pressure perturbations quickly dissipate. Although specific results may differ from site to site, this type of analysis should be useful to site operators and regulators when selecting leak detection strategies. Given the spatial characteristics of a proposed monitoring well network, probabilities of leakage detection can be rapidly calculated using this methodology.Although conditions such as these may not be favorable for leakage detection in shallow aquifers, leakage detection could be much more successful in the injection reservoir. We demonstrate proof-of-concept for this hypothesis, presenting a simulation where there is measurable pressure change at the injection well due to overpressurization, fault rupture, and consequent leakage up the fault into intermediate and shallow aquifers. The size of the detectible pressure change footprint is much larger in the reservoir than in either of the overlying aquifers. Further exploration of the range of conditions for which this technique would be successful is the topic of current study. (C) 2015 Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creavativecommons.org/licesses/by-nc-nd/3.0/). Peer-review under responsibility of the Organizing Committee of GLIGT-12

Global Sampling for Integrating Physics-Specific Subsystems and Quantifying Uncertainties of CO2 Geological Sequestration

Uncertainty Quantification of CO 2 Leakage Through a Fault with Multiphase and Nonisothermal Effects

Dynamic Reduced-Order Models of Integrated Physics-Specific Systems for Carbon Sequestration

Probabilistic Evaluation of Shallow Groundwater Resources at a Hypothetical Carbon Sequestration Site

Underground sources of drinking water chemistry changes in response to potential CO2 leakage

Risk Evaluation of CO2 Leakage Through Fracture Zone in Geological Storage Reservoir

Assessment of shallow aquifer remediation capacity under different groundwater management conditions in CGS field

Uncertainty Quantification for Evaluating Impacts of Caprock and Reservoir Properties on Pressure Buildup and Ground Surface Displacement During Geological CO2sequestration

Key Factors for Determining Groundwater Impacts Due to Leakage from Geologic Carbon Sequestration Reservoirs

Potential Chemical Impacts of Subsurface CO2: an Integrated Experimental and Numerical Assessment for a Case Study of the Ogallala Aquifer

A Feasibility Study of CO2geologic Sequestration Integrating Reservoir Simulation, Rock-Physics Theory, and Seismic Modeling

Quantitative assessment of CO2 leakage risk in geologic carbon storage management

On modeling the potential impacts of CO 2 sequestration on shallow groundwater: Transport of organics and co-injected H 2 S by supercritical CO 2 to shallow aquifers

Probabilistic modeling and global sensitivity analysis for $CO_2$ storage in geological formations: a spectral approach

Chemical Impacts of Potential CO2 and Brine Leakage on Groundwater Quality with Quantitative Risk Assessment: A Case Study of the Farnsworth Unit

Effective Detection of CO2 Leakage: a Comparison of Groundwater Sampling and Pressure Monitoring

Global Sensitivity Analysis of Leakage Risk for CO2 Geological Sequestration in the Saline Aquifer of Yancheng Formation in Subei Basin

Injectivity Evaluation for Offshore CO2 Sequestration in Marine Sediments

Simulation of bench-scale CO2 injection using a coupled continuum-discrete approach

CO2 storage in deep saline aquifers: evaluation of geomechanical risks using integrated modeling workflow

Uncertainty Quantification of Fluid Leakage and Fault Instability in Geologic CO2 Storage