Abstract:Chemical-looping combustion (CLC) is a novel and promising option for several applications including carbon capture (CC), fuel reforming, H-2 generation, etc. Previous studies demonstrated the feasibility of performing CLC in a novel rotary design with micro-channel structures. Part 1 of this series studied the fundamentals of the reactor design and proposed a comprehensive design procedure, enabling a systematic methodology of designing and evaluating the rotary CLC reactor with different OCs and operating conditions. This paper presents the application of the methodology to the designs with three commonly used OCs, i.e., copper, nickel, and iron. The physical properties and the reactivities of the three OCs are compared at operating conditions suitable for the rotary CLC. Nickel has the highest reduction rate, but relatively slow oxidation reactivity while the iron reduction rate is most sensitive to the fuel concentration. The design parameters and the operating conditions for the three OCs are selected, following the strategies proposed in Part 1, and the performances are evaluated using a one-dimensional plug-flow model developed previously. The simulations show that for all OCs, complete fuel conversion and high carbon separation efficiency can be achieved at periodic stationary state with reasonable operational stabilities. The nickel-based design includes the smallest dimensions because of its fast reduction rate. The operation of nickel case is mainly limited to the slow oxidation rate, and hence a relatively large share of air sector is used. The iron-based design has the largest size, due to its slow reduction reactivity near the exit or in the fuel purge sector where the fuel concentration is low. The gas flow temperature increases monotonically for all the cases, and is mainly determined by the solid temperature. In the periodic state, the local temperature variation is within 40 K and the thermal distortion is limited. The design of the rotary CLC is also scaled to different pressures and inlet temperatures. The method of scaling is discussed and desirable operational performances are obtained. (C) 2013 Elsevier Ltd. All rights reserved.

Efficient Cycles for Carbon Capture CLC Power Plants Based on Thermally Balanced Redox Reactors

Analysis of Thermally Coupled Chemical Looping Combustion-Based Power Plants with Carbon Capture

Parameters Analysis and Techno-Economic Comparison of Various ORCs and Sco2 Cycles As the Power Cycle of Lead–Bismuth Molten Nuclear Micro-Reactor

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

Rotary Bed Reactor for Chemical-Looping Combustion with Carbon Capture. Part 1: Reactor Design and Model Development

Rotary Bed Reactor for Chemical-Looping Combustion with Carbon Capture. Part 2: Base Case and Sensitivity Analysis

Design of a Rotary Reactor for Chemical-Looping Combustion. Part 2: Comparison of Copper-, Nickel-, and Iron-Based Oxygen Carriers

A Reduced Fidelity Model for the Rotary Chemical Looping Combustion Reactor

Design and Techno-Economic Optimization of a Rotary Chemical Looping Combustion Power Plant with CO2 Capture

Thermodynamic and economic analysis of methane cycle carbon dioxide reforming thermally coupled with chemical looping combustion for liquid fuel production

Design of a rotary reactor for chemical-looping combustion. Part 1: Fundamentals and design methodology

Numerical Investigation of a 1MW Full-Loop Chemical Looping Combustion Unit with Dual CFB Reactors

Thermodynamic analysis of using chemical-looping combustion in Allam-Z cycle instead of common combustion

Design Theory of a CLC Air Reactor with Oxygen Carrier Recirculation and Its Application to a 3 MWth Pilot

Performance Comparison and Optimization of Two Configurations of (very) High Temperature Gas-Cooled Reactors Combined Cycles

Pressurised Chemical Looping Combustion (PCLC): Air Reactor Design

Parametric Study of Chemical Looping Combustion for Tri-Generation of Hydrogen, Heat, and Electrical Power with Co2 Capture

Three-dimensional Simulation of a Gas-Fueled Chemical Looping Combustion System with Dual Circulating Fluidized Bed Reactors

Dimensioning Air Reactor and Fuel Reactor of a Pressurized CLC Plant to Be Coupled to a Gas Turbine: Part 2, the Fuel Reactor

Evaluation of the effect of pressure and heat transfer on the efficiency of a batch fuel reactor, using Iron-based Oxygen Carrier with a CFD model

Concept Design, Parameter Analysis, and Thermodynamic Evaluation of a Novel Integrated Gasification Chemical-Looping Combustion Combined Cycle Power Generation System