Abstract:In order to operate wireless electronic devices at locations that are not conveniently accessible for wiring or battery replacement, energy harvest techniques have been developed to convert harvested environmental mechanical energy to electrical energy, which can be used for convenient device operation or battery charging. Due to the strong electromechanical coupling effect, piezoelectric materials are employed for this purpose. Recently, piezoelectric energy harvesters that are composed of flexible piezoelectric films or strips are adopted for converting mechanical energy from ambient fluids induced vibrations into electric energy[Carroll (2002); Akaydin et al. (2010); Allen and Smits (2001); Peng and Zhu (2009); Zhu and Peng (2009)]. To extract energy as much as possible, the harvesters are usually designed as resonant devices operating near resonance. We study a new piezoelectric structure for energy harvesting from flow-induced vibration. It consists of a properly poled and electroded flexible piezoelectric ceramic cylinder (Fig. 1) in a perpendicular flow. The transverse force from the flow [Fung (1969)] drives the cylinder into flexural vibrations with an electrical output. An analytical solution is obtained from which the output power and efficiency of the harvester versus outer electrodes angle are calculated and examined. For a cylinder of 40 cm in length and 1 cm in diameter in flowing air with a speed of 5 m/s, the output power is of the order of 10^-3 watt (Fig. 2). It becomes significantly higher if the flow speed is increased. The nonlinear behaviors of this energy harvester near resonance are analyzed subsequently. The geometrically-nonlinear effect of the cylinder is studied with considering the in-plane extension incidental to the large deflection. The boundary electric charges generated from two deformation modes, flexure and in-plane extension, were distinguished with each other because the charge corresponding to the latter mode produces no contribution to the output current. Numerical results on output powers show that there are multivaluedness and jump behaviors (Fig. 6). Based on both the linear and nonlinear results, how to design the energy harvester to get the maximum output power is discussed.

Modeling of Piezoelectric Energy Harvesting from Freely Oscillating Cylinders in Water Flow

Theoretical Modeling and Nonlinear Analysis of Piezoelectric Energy Harvesting from Vortex-Induced Vibrations

Modeling and Identification of Circular Cylinder-based Piezoaeroelastic Energy Harvesters

Piezoelectric Energy Harvesting from Vortex-Induced Vibration Using a Modified Circular Cylinder

Designed Simulation and Experiment of a Piezoelectric Energy Harvesting System Based on Vortex-Induced Vibration

A Piezoelectric Energy Harvester with Bending–Torsion Vibration in Low-Speed Water

Harvesting Weak Vibration Energy by Integrating Piezoelectric Inverted Beam and Pendulum

A Piezoelectric Energy Harvester Based on Flow-Induced Flexural Vibration of A Circular Cylinder

A Study of Vortex-Induced Energy Harvesting from Water Using Pzt Piezoelectric Cantilever with Cylindrical Extension

Promote Performance of Vibration Energy Harvesting by Amplified Inertial Force and Clamped Piezoelectric Beams

Piezoelectric wind energy harvesting from vortex- induced vibrations of an elastic beam

Hybrid Vibration Energy Harvesting Based on Piezoelectric Polyline Beams with Electret Coupling

A novel floating piezoelectric energy harvesting from water waves: fully-coupled simulation

A Novel Piezoelectric Energy Harvester Using the Macro Fiber Composite Cantilever with A Bicylinder in Water

Modeling and Power Performance Improvement of a Piezoelectric Energy Harvester for Low-Frequency Vibration Environments

A Circular-Cylinder Piezoelectric Energy Harvester Based on Flow-Induced Flexural Vibration Mode and Its Nonlinear Characteristics Near Resonance

Piezoelectric energy harvesting from concurrent vortex-induced vibrations and base excitations

Piezoelectric Wind Energy Harvesting from Self-Excited Vibration of Square Cylinder.

Modeling and Analysis of Upright Piezoelectric Energy Harvester under Aerodynamic Vortex-induced Vibration

A circular-cylinder piezoelectric energy harvester based on flow-induced flexural vibration mode and its nonlinear characteristics near resonance *

Modeling and Experimental Study of a Piezoelectric Energy Harvester from Vortex Shedding-Induced Vibration