Abstract:Graphene has been a superstar in the fields ranging from materials science to condensed-matter physics since 2004. Graphene possesses good thermal and mechanical properties, high electron transfer capability and relatively low production cost. As a consequence, graphene has been used in the areas of multi-functional advanced materials and electronics. A direct disperse method has been widely applied to polymers to improve their dielectric properties. Recently, graphene/polymer composites have received much attention. Graphene nanosheets can significantly improve the physical properties of the host polymer at a very low content of conductive filler loading. Poly vinylidene fluoride (PVDF) is a semicrystalline thermoplastic polymer with remarkably high piezo-/pyroelectric coefficient, and excellent thermal stability and chemical resistance. More efforts have been recently devoted to the preparations of high-' composites based on PVDF. In this work, a graphene/PVA/PVDF nanocomposite film composed of poly(vinyl alcohol) (PVA), reduced graphene oxide (RGO), and poly (vinylidene fluoride) (PVDF) is fabricated. First of all, graphene oxide (GO) is prepared by the modified Hummers method. GO and PVA are successively dissolved in the dimethyl sulfoxide (DMSO) solution, in order to obtain PVA functionalized GO which is formed via non-covalent bonds. Then PVDF is added into this solution to form a homogeneous three-phase aqueous mixture. According to the solution-casting and thermal reduction processes, the three-phase nanocomposite films are formed. The thickness values of the films are in a range of 0.3-0.4 mm. The square specimens are coated with a silver paste prior to electrical measurements. The obtained products are characterized using X-ray diffraction, UV Vis absorption spectrum, Fourier transform infrared absorption spectrum, and atomic force microscopy. The morphologies of PVDF and RGO/PVA/PVDF films are investigated by a scanning electron microscope. Electrical measurements are conducted in a frequency range from 102 to 104 Hz. Results suggest that GO can be reduced to RGO and phase transition of PVDF from to phases is effectively promoted at 120 ℃. The dielectric properties of the polymer matrix are improved. Furthermore, PVA modified RGO is easier to disperse in the PVDF substrate than the original one, which strongly reduces the spherulite size of PVDF and improves the dielectric property of the composite film. The percolation threshold (fvol*) of RGO/PVA/PVDF film is estimated to be 8.45 vol.%, and the dielectric constant of the film is 238 times as large as that of the pure PVDF films at 102 Hz. In addition, the dielectric constant increases rapidly near the percolation threshold and depends on frequency, which is mainly ascribed to the Maxwell-Wagner-Sillars polarization in the low frequency range. This study provides a low-cost and simple method of preparing polymer nanocomposites with high dielectric properties.

Poly(vinyl pyrrolidone)-coated graphene/poly(vinylidene fluoride) composite films with high dielectric permittivity and low loss

Graphene/poly(vinylidene Fluoride) Dielectric Composites with Polydopamine As Interface Layers

Improved Dielectric Properties of Nanocomposites Based on Poly(vinylidene Fluoride) and Poly(vinyl Alcohol)-Functionalized Graphene

Dielectric Properties of Graphene/Poly(Vinyl Alcohol)/Poly (vinylidene Fluoride) Nanocomposites Films

Suppressed Dielectric Loss and Enhanced Thermal Conductivity in Poly(vinylidene Fluoride) Nanocomposites Using Polyethylene Glycol-Grafted Graphene Oxide

Fe3O4 Decorated Graphene/poly(vinylidene Fluoride) Nanocomposites with High Dielectric Constant and Low Dielectric Loss

Achieving Significantly Enhanced Dielectric Performance of Reduced Graphene Oxide/polymer Composite by Covalent Modification of Graphene Oxide Surface

Enhanced dielectric permittivity and suppressed electrical conductivity in polyvinylidene fluoride nanocomposites filled with 4,4'-oxydiphenol-functionalized graphene.

Novel Method for the Fabrication of Flexible Film with Oriented Arrays of Graphene in Poly(vinylidene Fluoride-Co- Hexafluoropropylene) with Low Dielectric Loss

Graphene oxide reinforced polyvinyl alcohol/polyethylene glycol blend composites as high-performance dielectric material

High Dielectric Permittivity and Low Loss of Polyvinylidene Fluoride Filled with Carbon Additives: Expanded Graphite Versus Reduced Graphene Oxide

An Enhancement on the Dielectric Performance of Poly(vinylidene Fluoride)-Based Composite with Graphene Oxide-Batio3 Hybrid

Polymer-Composite With High Dielectric Constant And Enhanced Absorption Properties Based On Graphene-Cus Nanocomposites And Polyvinylidene Fluoride

Functionalized Graphene–batio3/ferroelectric Polymer Nanodielectric Composites with High Permittivity, Low Dielectric Loss, and Low Percolation Threshold

Enhanced Dielectric Properties of PVDF Nanocomposites with Modified Sandwich-Like GO@PVP Hybrids

High Dielectric Permittivity And Low Dielectric Loss Nanocomposites Based On Poly(Vdf-Trfe-Ctfe) And Graphene Nanosheets

Polydopamine Coating Layer on Graphene for Suppressing Loss Tangent and Enhancing Dielectric Constant of Poly(vinylidene Fluoride)/graphene Composites

Percolative Multi-Susceptible PVDF/NZFO Composite Films with Triply Controlled High Dielectric and Magnetic Properties

Graphene sheets segregated by barium titanate for polyvinylidene fluoride composites with high dielectric constant and ultralow loss tangent

Amorphous TiO2-coated Reduced Graphene Oxide Hybrid Nanostructures for Polymer Composites with Low Dielectric Loss

Nanocomposites of Poly(vinylidene Fluoride) - Controllable Hydroxylated/carboxylated Graphene with Enhanced Dielectric Performance for Large Energy Density Capacitor