Abstract:The outstanding diffusivity and permeability of supercritical carbon dioxide (scCO2) are extremely beneficial for grafting reaction. In this work, aramid fibers (AF) are modified in scCO2 by glycidyl-polyhedral oliomeric silsesquioxane (POSS) with 2-ethyl-4-methylimidazole (2E4MZ) on the basis of cleaning with acetone. The surface morphology and chemical structure of the modified AF were measured and characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Thermogravimetric (TG), and Atomic force microscope (AFM). The interfacial shear strength (IFSS) was measured by a micro-bond pull-out test, then the modified AF/EP composites were prepared and the interlaminar shear strength (ILSS) was characterized. Research has shown that some of the glycidyl-POSS molecular chains permeated into the surface of the fiber and grafted onto the surface of the AF after modification, and the other glycidyl-POSS self-assembled on the surface of the fiber. XPS indicated the introduction of C–O and –COO–, which confirmed the existence of chemical reactions between AF and glycidyl-POSS. AFM and SEM images revealed that 2E4MZ, not only promoted the grafting reaction of glycidyl-POSS, but also intensified the self-assembly of glycidyl-POSS, both of which increased the roughness of the fiber. A monofilament tensile test and micro-bond pull-out test showed that there was a negative effect on the tensile strength after scCO2 processing. The tensile strength of modified AF, with glycidyl-POSS, increased the highest strength of 25.7 cN dtex−1, which was 8% higher than that of pristine AF. The improvement of ILS roughness and the polar chemical groups produced in grafting reaction. These results indicated that AF, treated in scCO2, with glycidyl-POSS, which is a suitable way of fiber modification, can significantly improve the surface adhesion of AF reinforced composites.

Reinforced Unsaturated Polyester Composites by Chemically Grafting Amino-Poss Onto Carbon Fibers with Active Double Spiral Structural Spiralphosphodicholor

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Interfacial enhancement of carbon fiber composites by poly(amido amine) functionalization

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Improved mechanical properties of carbon fiber/epoxy composites via fiber surface grafting of rigid-flexible chain structure

Study on Surface Properties of Aramid Fiber Modified in Supercritical Carbon Dioxide by Glycidyl-POSS

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

A "sizing-free" strategy to improve the interfacial property of PEEK/CF composites based on "grafting-bridging" bifunctional diazonium salt

Polydopamine particle in-situ assisted carbon fiber/CNTs brush with dynamic imine bonds for enhancing the interface properties of its polyamide 6 composites

Reinforcement of polyamide 6 with carbon fiber surface modified by a polar cross-linked network interfacial phase

Improvement of interfacial interaction between poly(arylene sulfide sulfone) and carbon fiber via molecular chain grafting

Improving the interfacial property of carbon fiber/PI resin composite by grafting modification of carbon fiber surface

Regulating interfacial compatibility with amino silane and bio-inspired polydopamine for high-performance epoxy composites

Preparation of gallic acid-polydimethylsiloxane codeposited carbon fibers to improve interfacial properties of epoxy composites

Polydopamine as an efficient and robust platform to functionalize carbon fiber for high-performance polymer composites.

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Modification of duel functioning PDA-PAADA capsules on interface and resin towards CFRPs with high strength and toughness

Improving carbon fibre reinforced polyphenylene sulfide using amine and phenolic interphase modifications

High-performance carbon fiber-reinforced epoxy resin composites based on novel, environmentally friendly, stability, and heat-moisture resistant nano emulsion encapsulated POSS sizing agent interface modification