Abstract:A new photonic crystal fiber is proposed for the transmission of more orbital angular momentum modes with a rectangular air hole arrangement to increase the cladding air-filling rate. The results reveal that the fiber can support 190 orbital angular momentum modes in the C+L band, with the topological charge ordering up to 48, and the effective refractive index difference between adjacent eigenmodes is above 10 −3 . The effective mode area of all the eigenmodes is larger than 208.02 μm 2 , the nonlinearity coefficient is less than 0.43 W −1 ∙km −1 , the confinement loss reaches up to 10 −12 -10 −8 dB/m, the dispersion is flat and the minimum dispersion change is 3.15 ps∙nm −1 ∙km −1 , with mode purity greater than 97.4%. Compared to existing typical orbital angular momentum transmission photonic crystal fibers, this fiber can support more orbital angular momentum modes for most purposes with lower nonlinearity coefficient, higher mode purity, better propagation characteristics but simpler structure. The highest nonlinearity coefficient is reduced by at least 0.3 W −1 ∙km −1 compared to existing typical orbital angular momentum transmission photonic crystal fibers. The effect of fabrication errors on the transmission quality of orbital angular momentum modes is also discussed, and the results reveal that the effect on mode transmission quality is small at 1% to 2% variations of air holes. Therefore, this photonic crystal fiber is promising in high-capacity communication systems.

Large Mode Area OmniGuide Fiber with Superconductor-Dielectric Periodic Multilayers Cladding

Analysis of Periodic Structure and Distorted Characteristic in Hollow Dielectric Waveguide Fibers

Simultaneously Achieving a Large Negative Dispersion and a High Birefringence Over Er and Tm Dual Gain Bands in a Square Lattice Photonic Crystal Fiber

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Large-Mode-Area Neodymium-Doped All-Solid Double-Cladding Silicate Photonic Bandgap Fiber With A 32 Mu M Core Diameter

Design of A Solid-Core Large-Mode-Area Bragg Fiber

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Large mode area single mode photonic crystal fiber with ultra-low bending loss

A Novel Three-Ring-core Few-Mode Fiber with Large Effective Area and Low Nonlinear Coefficient

Design and analysis for a bend-resistant and large-mode-area photonic crystal fiber with hybrid cladding

Hollow Silica Photonic Crystal Fiber Guiding 101 Orbital Angular Momentum Modes Without Phase Distortion in C+L Band

Ultralow bending-loss micro-structured fiber with large-mode-area

Large-mode-area neodymium-doped all-solid double-cladding silicate photonic bandgap fiber with an index step of similar to 0.5%

The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Numerical Investigation on a New Designed Hollow-Core Photonic Crystal Fiber with Large Modal Separation

Mode transmission performance study of a novel heterogeneous helical cladding fiber with an isolation ring

High Performance Large Mode-Area Ytterbium-doped Photonic Crystal Fiber for Fiber Lasers

Wideband, large mode field and single vector mode transmission in a 37-cell hollow-core photonic bandgap fiber

All-solid bend-resistant large mode area fiber design with highly doped rods in the cladding

A-Axis Nd:MgO:LiNbO3single Crystal Fibers with Magnesium-Ion Indiffused Cladding

Design of Photonic Crystal Fiber Supporting 190 Orbital Angular Momentum Modes with Low Nonlinearity Coefficient