Abstract:In this work, high-power tandem-pumped random fiber lasers are investigated in detail. A 6.5 W random fiber laser seed centered at 1070 nm with a half-open cavity structure was built. Boosted by two amplifier stages, the random fiber laser achieved a power of several kilowatts. Stimulated Raman scattering (SRS) mitigation is challenging in tandem-pumped fiber lasers. To suppress SRS, several methods were applied, including avoiding external feedback in the oscillator stage, incorporating a high core/cladding diameter ratio gain fiber, and using a band pass filter (BPF) to mitigate Raman noise. The latter proved to be the most effective method; therefore, SRS mitigation without and with a BPF was investigated at 3.5 kW, leading to suppression ratios rising from 14 to 30 dB. By increasing the pump power continuously to 5.6 kW, we realized a record output power of 5.1 kW, corresponding to an SRS suppression ratio of 27 dB. Owing to the high-brightness 1018 nm fiber lasers serving as the pump sources and the high gain coefficient in the second amplifier stage, the entire system demonstrated high efficiency and stability. At the maximum power level, the total optical-to-optical efficiency reached 89.0%. This work offers an economic and practical technique for realizing high-power and high-efficiency random fiber lasers with effective SRS mitigation, while the experimental results suggest the potential for further power scaling.

Gain Characteristic of Spontaneous Brillouin Scattering in 50 Km Single-Mode Fiber with a Raman Pump

A Flattening Gain Raman Amplifier Involved Only 2 Cascaded FBG Based Multi-Wavelength Pumps

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Stimulated Brillouin scattering and Rayleigh cooperative process in 300 km optical transmission

Ultrafast Raman fiber Laser with Random Distributed Feedback

Stimulated Brillouin Scattering Phenomena in A Nanosecond Linearly Polarized Yb-Doped Double-Clad Fiber Amplifier

Design Gain Characteristic Of Dual-Pump Fiber Raman Amplifier

Stimulated Brillouin Scattering Suppression and Optical Parametric Amplification in Highly Nonlinear Optical Fiber

Enhanced strong-coupling stimulated Brillouin amplification assisted by Raman amplification

100 Km Brillouin Optical Time-Domain Reflectometer Based on Unidirectionally Pumped Raman Amplification

Fiber-bragg-grating-based dispersion-compensated and gain-flattened raman fiber Amplifier.

Brillouin scattering signal in polymer optical fiber enhanced by exploiting pulsed pump with multimode-fiber-assisted coupling technique.

Dual-wavelength bidirectional pumped high-power Raman fiber laser

Multi-Channel Broadband Brillouin Slow Light with Multiple Longitudinal Mode Pump

Pure passive fiber enabled highly efficient Raman fiber amplifier with record kilowatt power

High-gain amplification of weak signal based on stimulated Brillouin scattering in optical fiber

Improvement in characteristics of a distributed Raman fiber amplifier by using signal-pump double-pass scheme

High Gain, Low Noise, Spectral-Gain-Controlled, Broadband Lumped Fiber Raman Amplifier

Nanosecond pulse pumped, fiber-integrated narrow linewidth linearly polarized Raman amplifier at 1120 nm

Broadband Source Generated by Stimulated Raman Scattering and Four-Wave Mixing in a Highly Nonlinear Optical Fiber Ring Cavity.

5.1 Kw Tandem-Pumped Fiber Amplifier Seeded by Random Fiber Laser with High Suppression of Stimulated Raman Scattering