Abstract:Raman fiber amplifiers (RFAs) have become increasingly important in optical communication systems and optical networks to compensate for the fiber loss and/or splitting loss. Comparing to the conventional rare-earth doped fiber amplifiers, RFAs have flexible signal gain band and low noise figure (NF) level [ 1].Recently, we reported an RFA with signal/pump double-pass the gain medium scheme by utilizing an optical circulator (OC) as a signal/pump reflector [7]. The experiments have successfully confirmed that the pumping efficiency improvement for this kind of RFA is more efficiency than other types of RFAs. What's more, the pumping efficiency improvement and the NF suppression can be realized simultaneously. Although it is crucial to numerically predict the characteristics of RFA such as signal power and noise figure (NF) versus pump wavelength, pump power, gain medium characteristic and so on, the optimum design of RFA parameters has not yet been addressed.In this paper, we preliminary describe the numerical simulation method based on a set of coupled steady-state equations to estimate the characteristics of signal/pump double-pass RFA. First we assume that the ASE level combines other noises is 30 dB lower than that of the input signal [8], so only the forward and backward signal/pump are considered. This is a typical boundary condition problem and Newton method is used. As we get the distribution of pump power and signal power along the DCF, the noise item at different frequency can be found by the relaxation method. After several iterations, all WDM channel signals and noise are convergent as predict. In this paper, in order to optimize the length of the DCF to get the best performance, we suggest a proper definition of NF called effective NF. During the simulation, the length of SMF is kept constant, so DCF length becomes the only dominant variable parameter to affect the gain and NF of the RFA. To verify the algorithm above, the parameters are set equal to those in Ref. [7], and the simulation results are in very good agreement with those of experimental data. To show the optimum DCF length under a fixed pump power and pump wavelength, we calculate results of both the signal output power and NF versus DCF length at three signal wavelengths. We find that the largest signal output power may appear at the length of DCF is 3.6 km, and the lowest NF could be found as the DCF length is 4 km. In general, DCF has a larger gain coefficient than that of the SMF, but the attenuation coefficient of the former is also higher than that of SMF. So, there is a trade-off when selecting the length of DCF. From the simulation results, we conclude that the optimum length of DCF is 3.8 +/- 0.2 km. DCF length of around 3.8 kin is an ideal value to realize the best characteristics for the RFA.

Improvement in characteristics of a distributed Raman fiber amplifier by using signal-pump double-pass scheme

Fiber-bragg-grating-based dispersion-compensated and gain-flattened raman fiber Amplifier.

A Flattening Gain Raman Amplifier Involved Only 2 Cascaded FBG Based Multi-Wavelength Pumps

Parameters Optimization of High Efficiency Discrete Raman Fiber Amplifier by Using the Coupled Steady-State Equations

Design of Raman-Parametric Fiber Amplifier for Wavelength Division Multiplex Transmission System

Hybrid Rsoa and Fibre Raman Amplified Long Reach Feeder Link for Wimax-On-Fibre

Parameters Optimization of A High Efficiency Discrete Raman Fiber Amplifier

Distributed Raman Amplification for Fiber Nonlinearity Compensation in a Mid-Link Optical Phase Conjugation System

Performance Analysis and Comparison of Bi-directionally Pumped Raman Amplifiers

Transmission Performance Analysis of Fiber Optical Parametric Amplifiers for Wdm System

Title Optically powered communication system with distributedamplifiers

Optically Powered Communication System With Distributed Amplifiers

Optimally Gain-Flattened and Dispersion-Managed C + L-band Hybrid Amplifier Using a Single-Wavelength Pump Laser

Polarization dependent gain in Raman fiber amplifiers with multiple pumps

High Gain, Low Noise, Spectral-Gain-Controlled, Broadband Lumped Fiber Raman Amplifier

Remotely Pumped Erbium Doped Fiber Amplifiers Using Low Power Pump in Ultra-long Span Dense Wavelength Division Multiplexing Systems

Single-Source Bidirectional Free-Space Optical Communications Using Reflective Soa-Based Amplified Modulating Retro-Reflection

Ultra-flat and Broadband Two-Pump Optical Parametric Amplifiers Using a Single-Section Highly Nonlinear Fiber

Ultrafast Raman fiber Laser with Random Distributed Feedback

Signal quality enhancement in multiplexed communication systems based on the simulation model of the optimum technical specifications of Raman fiber optical amplifiers

Numerical Investigation of Raman-Assisted Four-Wave Mixing in Tapered Fiber Raman Fiber Amplifier