Abstract:Jet fuel is used as a coolant before it is burned in the combustor of the aircraft. Insoluble particles and surface deposits can impair engine performance. Jet fuel thermal oxidation test (JFTOT) defines the standard test method for evaluation of the deposit formed through heating fuels in tubes caused by thermal oxidation (<400°C). At a higher temperature, fuel in the heating process decomposes leading to surface deposits by coking. In this work, we propose a method to evaluate the security of fuel flowing in the tube at high temperatures (>500°C). The heat transfer and cracking performances of two hydrocarbon fuels which are laboratory modified aviation kerosene (Fuel 1 (ρ=0.85g/cm3) and Fuel 2 (ρ=0.78g/cm3)) have been investigated in a heat-exchanger under supercritical conditions (T=700–770°C, p=2.5–5.5MPa, m=0.4–1.0g/s). The temperature and flow rate in this work are much higher than those in JFTOT. The safe run time (SRT) is used to evaluate the heat transfer security of each fuel. As the temperature increases or the flow rate decreases or the pressure increases, the SRTs of Fuel 1 and Fuel 2 decrease clearly. In general, the heat transfer security of Fuel 1 is better than that of Fuel 2. Moreover, the volumetric heat sink of Fuel 1 is larger than that of Fuel 2. So, the overall performance of Fuel 1 is more excellent when it is used as propellant and coolant for hypersonic aircraft. In consideration of the heat transfer security, heat sink and the required driving force for aircraft, the temperature of fuel at the exit of heat transfer passage should be set as 740°C, the flow rate of fuel should be 0.6–1.0g/s, the pressure of heat transfer passage should be 3.5MPa. Based on these results, we find that the modification of a high density fuel is an effective way to prepare an advanced hydrocarbon fuel.

Mechanism and Influencing Factors Analysis of Flowing Instability of Supercritical Endothermic Hydrocarbon Fuel Within A Small-Scale Channel

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

A comprehensive review of the thermal cracking stability of endothermic hydrocarbon fuels

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Flow and Heat Transfer Instability of Supercritical Carbon Dioxide in a Vertical Heated Tube

Large Eddy Simulations and Analyses of Hydrocarbon Fuel Heat Transfer in Vertical Upward Flows at Supercritical Pressures

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

Heat Transfer and Cracking Performance of Endothermic Hydrocarbon Fuel when It Cools a High Temperature Channel

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

Modeling and Analysis of Supercritical Flow Instability in Parallel Channels

Study on influence of forced vibration of cooling channel on flow and heat transfer of hydrocarbon fuel at supercritical pressure

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

The heat transfer mechanism coupling pyrolysis and flow of hydrocarbon fuel in heated tube under supercritical pressure

Flow Dynamics in Transient Heat Transfer of N-Decane at Supercritical Pressure

Experimental Investigation of the Flow and Heat Transfer Instabilities in N-Decane at Supercritical Pressures in a Vertical Tube

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Thermal Cracking and Heat Transfer of Hydrocarbon Fuels at Supercritical Pressures in Vertical Tubes

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Investigation on heat transfer during transpiration cooling with hydrocarbon fuel coolant