Abstract:Liquid hydrogen (LH 2 ) holds great potential in both aerospace and civil markets due to its high energy density. However, on account of the low boiling point and latent heat of vaporization of LH 2 , the high performance insulation storage system is the key to its efficient storage. One of the most efficient insulation methods for a LH 2 storage system is considered to be Variable Density Multilayer Insulation (VDMLI) coupled with Vapor-Cooled Shield (VCS). This study establishes a quasi-two-dimensional (quasi-2D) thermodynamic model of liquid hydrogen storage system with VDMLI and VCS. The quasi-2D model incorporates the temperature gradient of VCS and its impact on VDMLI. The model can reveal the two-dimensional temperature and heat distribution in insulation systems , predict heat leakage and evaporation rate, and can be utilized for optimizing the design of the VCS structure. Using a NASA's tank as an example, the analysis conducted with the model indicates that the presence of VCS reduces the average temperature gradient of the inner VDMLI. The upper half of the tank exhibits a significantly smaller temperature gradient compared to the lower half, resulting in lower heat leakage. This effect becomes more pronounced as the VCS moves outward of the tank. Additionally, the VCS absorbs more heat in the inlet section than that in the outlet section, and this disparity becomes increasingly significant as the VCS moves outward of the tank. The model can also be employed to optimize the position of the VCS, resulting in a 69.73 % reduction in daily evaporation rate compared to NASA's original design. Lastly, a graphical method for the quick design of VCS structure is proposed which is based on calculated data for daily evaporation rate and apparent thermal conductivity. This method enables the retrieval of the corresponding apparent thermal conductivity based on the desired evaporation rate, facilitates the rapid determination of the range of VCS position, and allows for the quick prediction of the evaporation rate based on the VCS position. In conclusion, this research presents a new approach for the performance analysis and optimization design of liquid hydrogen storage system with VDMLI and VCS.

Thermal performance of foam/MLI for cryogenic liquid hydrogen tank during the ascent and on orbit period

Heat Transfer Behaviors on Combinational Insulation of Spray-On Foam and Variable Density Multilayer for Cryogenic Propellant Tanks

Study on unsteady evacuation characteristics of multi-layer insulation during launch/in orbit of the cryogenic propellant tanks

The influence of inner material with different average thermal conductivity on the performance of whole insulation system for liquid hydrogen on orbit storage

Experimental investigation on the discharge and suction gas performance in the multilayer insulation microchannels

Thermal Performance Study for Hybrid SOFI and MLI System Used in Space

Numerical Study on Composite Multilayer Insulation Material for Liquid Hydrogen Storage

Thermodynamic analysis and comparison of four insulation schemes for liquid hydrogen storage tank

Experimental study of self-pressurizing transfer system for cryogenic liquid

Dynamic Thermal Performance of Cryogenic Liquid Hydrogen Heating from Gas-Liquid Stratification to Supercritical under a Constant Heat Flux Condition: A Two-Step Simulation

Additional mass due to moisture uptake of foam at 45 K

Transient thermal behavior of multi-layer insulation coupled with vapor cooled shield used for liquid hydrogen storage tank

Development of Multilayer Insulation Blanket of Aerogel With Ultra-Low Thermal Conductivity

Experimental Study on Cryogenic Moisture Uptake in Polyurethane Foam Insulation Material

Theoretical Analysis of Entropy Generation in Multilayer Insulations: A Case Study of Performance Optimization of Variable Density Multilayer Insulations for Liquid Hydrogen Storage Systems

Experimental and Computational Study of the Thermal Insulation Properties of Hollow Glass Microspheres

Experimental Study of Moisture Uptake of Polyurethane Foam Subjected to a Heat Sink below 30 K

Study on SOFI /VD- MLI technology for ZBO storage

Design and Optimization of the Insulation Performance of a 4000 m3 Liquid Hydrogen Spherical Tank

Cryogenic insulation performance of polyimide foam-filled fluted-core composite sandwich panels

A quasi-2D thermodynamic model for performance analysis and optimization of liquid hydrogen storage system with multilayer insulation and vapor-cooled shield