Abstract:Efficient and reliable thermal insulation for cryogenic propellant storage in orbit is an essential ingredient for long-duration missions in future space exploration. A new combinational thermal insulation composed of spray-on foam insulation (SOFI) and variable density multilayer insulation (VD-MLI), is suitable for cryogenic propellant storage due to its excellent heat insulation and light quality. Based on the heat transfer calculation model of SOFI/VD-MLI for ground and space stages, the variations of total heat flux through the combinational insulation with the thickness of SOFI and VD-MLI, the warm boundary temperature, and storage medium were analyzed. Comparison between numerical results and experimental results from the literature shows that the model is feasible to be applied in engineering. In the ground stage, the heat flux through the SOFI/VD-MLI decreases by approximately 92.7% with a SOFI thickness of 10 mm than 150 mm in the condition of constant VD-MLI thickness, and declines by 8.4% with the VD-MLI thickness of 10 mm than 150 mm in the condition of constant SOFI thickness. In the space stage, however, the descent degree of the heat flux is approximately 13% and 90%, respectively, in the corresponding aforementioned conditions. Because the warm boundary temperature is constant, the total heat flux through the combinational insulation will be less sensitive to the storage medium. Furthermore, variations in VD-MLI thermal resistance and heat fluxes by solid heat conduction and heat radiation with layer position presented a jumping change at the interface of different layer density regions. The results show that there is an optimal combination thickness for SOFI and VD-MLI on the ground and in space. (c) 2019 American Society of Civil Engineers.

Study on SOFI /VD- MLI technology for ZBO storage

Heat Transfer Behaviors on Combinational Insulation of Spray-On Foam and Variable Density Multilayer for Cryogenic Propellant Tanks

Thermal Performance Study for Hybrid SOFI and MLI System Used in Space

Modeling and Experimental Study on Combination of Foam and Variable Density Multilayer Insulation for Cryogen Storage

Experimental study of self-pressurizing transfer system for cryogenic liquid

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Progress of study and prospect on experiments of boil-off losses control of cryogenic propellant

Study on unsteady evacuation characteristics of multi-layer insulation during launch/in orbit of the cryogenic propellant tanks

Thermal performance of foam/MLI for cryogenic liquid hydrogen tank during the ascent and on orbit period

Experimental Study on Refrigeration Performance and Fluid Thermal Stratification of Thermodynamic Vent

Research Progress of Zero Boil off Storage of Cryogenic Propellant On?orbit

Performance optimization and analysis of variable density multilayer insulation

Experimental investigation on the discharge and suction gas performance in the multilayer insulation microchannels

Comparative Study on Thermodynamic Characteristics of Composite Thermal Insulation Systems with Liquid Methane, Oxygen, and Hydrogen

Insulation Performance of Foam During the Terrestrial and Ascent Period

Modeling and Optimization of Composite Thermal Insulation System with HGMs and VDMLI for Liquid Hydrogen on Orbit Storage

Evaluation of Cryogenic Liquids ZBO Storage with Different Solutions

Pressurization Performance and Temperature Stratification in Cryogenic Final Stage Propellant Tank

Cfd Investigation On Thermodynamic Characteristics Of On-Orbit Cryogenic Tank During Reorientation Process

Thermodynamic analysis and comparison of four insulation schemes for liquid hydrogen storage tank

The influence of inner material with different average thermal conductivity on the performance of whole insulation system for liquid hydrogen on orbit storage