Abstract:Advances in Structural Engineering, Ahead of Print. The external excitations, interface forces and responses at the interface degrees-of-freedom are normally required in many existing substructural condition assessment methods, while they are difficult or even impossible to be accurately measured. To address this issue, a digital twin framework for output-only substructural damage identification with data fusion of muti-type responses is proposed in the present paper. First, heterogeneous responses including displacements, strains and accelerations from the target substructure are measured and divided into two sets. The multi-type responses in measurement set 2 are reconstructed with the first set of responses and transmissibility matrix in time domain. Then, a recovery method is introduced to obtain angular displacements from translational displacements and strains, to acquire angular accelerations from translational accelerations and the second order derivatives of strains by continuous wavelet transform. The recovered angular displacements and angular accelerations are involved into the evaluation of objective function. Besides, to avoid the single and monotonous search operation of traditional optimization algorithms, a reinforced learning-assisted Q-learning hybrid evolutionary algorithm (QHEA) by integrating Q-learning algorithm, differential evolution algorithm, Jaya algorithm, is developed as a search tool to solve the optimization-based inverse problem. The most suitable search strategy among DE/rand/1, DE/rand/2, DE/current-to-best/1, Jaya mutation in each iteration is selected and implemented under the guidance of Q-learning algorithm. Numerical studies on a three-span beam structure are performed to verify the effectiveness of the proposed approach. The results demonstrates that the proposed output-only substructural damage identification approach can accurately identify locations and severities of multiple damages even with high noise-polluted responses.

Substructural Condition Assessment Based on Force Identification and Interface Force Sensitivity

A Data‐driven Combined Deterministic‐stochastic Subspace Identification Method for Condition Assessment of Roof Structures Subjected to Strong Winds

Locate Damage Based on Change in Structural Shape Calculated from Uniform Load Surface

An Output‐only Structural Condition Assessment Method for Civil Structures by the Stochastic Gradient Descent Method

Substructural damage identification in a digital twin framework using heterogeneous response reconstruction

Shear characteristics of interface based on subloading-friction model

Substructural identification for damage estimation of structures

Structural condition assessment of a bridge pier: A case study using experimental modal analysis and finite element model updating

Structural damage identification with unknown external inputs based on the sparse constraint

Structural modal identification and MCMC-based model updating by a Bayesian approach

Structural damage identification using system dynamic properties

Approach for the structural reliability analysis by the modified sensitivity model based on response surface function - Kriging model

Structural damage identification based on dynamic deflection sensitivity of bridge under vehicle loading

A Substructure-based Model Updating Method to Damage Detection for Large-scale Structures

Theoretical and experimental study on interface stiffness measurement of rough surface using improved acoustic model

A Damage Index Based on Strain Measurement for Structures Under Environmental Excitation

A Multi-Objective DIRECT Algorithm Towards Structural Damage Identification with Limited Dynamic Response Information

Two-stage damage diagnosis approach for steel braced space frame structures

Structural Damage Identification Based on Transmissibility in Time Domain

Structural damage identification using piezoelectric impedance measurement with sparse inverse analysis

Structural damage identification using static test data and changes in frequencies