Abstract:The most critical aspect in the assembly of phosphor-converted white light-emitting diodes (pc-WLEDs) is how to stabilize the device in a practical environment. The high applied currents can generate enormous heat up to more than 100 °C, and such a continuous illumination process will lead to serious effects concerning the stability of the device. Therefore, the new search for examples to fully suppress thermal quenching effect is a real challenge. In this study, a novel Eu3+-activated CaMgGeO4 (CMGO) phosphor of olivine type is developed via a conventional solid-state reaction. The results reveal that Eu3+ occupies the low symmetric Ca2+ site of this host. Upon visible-light sensitization at 464 nm, a dominant red emission band with maximum at 612 nm is witnessed. Its full width at half-maximum (fwhm) is merely ∼4.37 nm, and a high color purity of around 94% is achieved. Their corresponding Commission Internationale de L'Eclairage (CIE) coordinates are very close to standard red color coordinates (0.666, 0.333). The influence of concentration and temperature on the optical property has been explored. It has been discovered that the optimized sample (CMGO:0.01Eu3+) is not influenced by the thermal quenching effect and its fluorescent intensity is improved even up to 473 K, which is mainly attributed to the incorporation of abundant trap sites generated by the nonequivalent substitution Eu3+ for Ca2+. After it is integrated into commercially available YAG:Ce3+ phosphor-based pc-WLEDs, the excellent optical parameters of the fabricated WLEDs are evaluated. The correlated color temperature (CCT) varies from cool white (6458 K) to warm (4370 K), and the color rendering index (CRI) increases from 78 to 86 under a high flux operating current of 200 mA. Furthermore, the chromaticity coordinates remain almost stable with the increasing drive current from 200 mA to 1000 mA. It is highly expected that CaMgGeO4:0.01Eu3+ will become a suitable red phosphor for the preparation of white LEDs with high efficiency.

Phosphor distribution optimization to decrease the junction temperature in white pc-LEDs by genetic algorithm

Phosphor temperature reduction by optimizing the phosphor configuration in white light-emitting diode package

Opto-thermal simulation model for optimizing laser-excited remote phosphor systems

Defect and energy transfer induced abnormal thermally stable and highly efficient narrow-band green emission

Structural Optimization for Remote White Light-Emitting Diodes with Quantum Dots and Phosphor: Packaging Sequence Matters.

A Modified Bidirectional Thermal Resistance Model for Junction and Phosphor Temperature Estimation in Phosphor-Converted Light-Emitting Diodes

Optimized Self-Adaptive Phosphor Coating Structure of White LEDs by Conventional Dispensing Method

Optical Study of Phosphor Converted Light Emitting Diodes with Given Correlated Color Temperatures

Development of Optical-Thermal Coupled Model for Phosphor-Converted LEDs

Dynamic Phosphor Sedimentation Effect on the Optical Performance of White LEDs

Thermal Influence of Phosphor to GaN-based White LEDs

Calculation of the Phosphor Heat Generation in Phosphor-Converted Light-Emitting Diodes

Efficient Energy Transfer from Trap Levels to Eu3+ Leads to Antithermal Quenching Effect in High-Power White Light-Emitting Diodes

Influence of Phosphor Saturation on 2-D Temperature Measurement in Phosphor- Converted LEDs by Microscopic Hyperspectral Imaging

Improvement of Emission Efficiency and Color Rendering of High-Power LED by Controlling Size of Phosphor Particles and Utilization of Different Phosphors.

Effect of the Substrate Temperature on the Phosphor Sedimentation of Phosphor-Converted LEDs

Heat Dissipation Enhancement of Phosphor-Converted White Laser Diodes by Thermally Self-Managing Phosphor-in-Glass

Hotspot Location Shift in the High-Power Phosphor-Converted White Light-Emitting Diode Packages

Angular color uniformity improvement for phosphor-converted white light-emitting diodes by optimizing remote coating phosphor geometry

Dip-transfer Phosphor Coating on Designed Substrate Structure for High Angular Color Uniformity of White Light Emitting Diodes with Conventional Chips

A Method to Eliminate the Effect of Phosphor Sedimentation on Led'S Angular Color Uniformity