Abstract:The most critical aspect in the assembly of phosphor-converted white light-emitting diodes (pc-WLEDs) is how to stabilize the device in a practical environment. The high applied currents can generate enormous heat up to more than 100 °C, and such a continuous illumination process will lead to serious effects concerning the stability of the device. Therefore, the new search for examples to fully suppress thermal quenching effect is a real challenge. In this study, a novel Eu3+-activated CaMgGeO4 (CMGO) phosphor of olivine type is developed via a conventional solid-state reaction. The results reveal that Eu3+ occupies the low symmetric Ca2+ site of this host. Upon visible-light sensitization at 464 nm, a dominant red emission band with maximum at 612 nm is witnessed. Its full width at half-maximum (fwhm) is merely ∼4.37 nm, and a high color purity of around 94% is achieved. Their corresponding Commission Internationale de L'Eclairage (CIE) coordinates are very close to standard red color coordinates (0.666, 0.333). The influence of concentration and temperature on the optical property has been explored. It has been discovered that the optimized sample (CMGO:0.01Eu3+) is not influenced by the thermal quenching effect and its fluorescent intensity is improved even up to 473 K, which is mainly attributed to the incorporation of abundant trap sites generated by the nonequivalent substitution Eu3+ for Ca2+. After it is integrated into commercially available YAG:Ce3+ phosphor-based pc-WLEDs, the excellent optical parameters of the fabricated WLEDs are evaluated. The correlated color temperature (CCT) varies from cool white (6458 K) to warm (4370 K), and the color rendering index (CRI) increases from 78 to 86 under a high flux operating current of 200 mA. Furthermore, the chromaticity coordinates remain almost stable with the increasing drive current from 200 mA to 1000 mA. It is highly expected that CaMgGeO4:0.01Eu3+ will become a suitable red phosphor for the preparation of white LEDs with high efficiency.

Passive anti-leakage of blue light for phosphor-converted white LEDs with crystal nanocellulose materials

Active thermal-fuse for stopping blue light leakage of white light-emitting diodes driven by constant current

High Performance Non-Doped Blue-Hazard-free Hybrid White Organic Light-Emitting Diodes with Stable High Color Rendering Index and Low Efficiency Roll-off

Low blue light hazard for tunable white light emitting diode with high color fidelity and circadian performances

Blue Light Hazard Optimization for White Light-Emitting Diode Sources with High Luminous Efficacy of Radiation and High Color Rendering Index

Multi-chip Dynamic White Light Emitting Diode with High Level Photobiological Safety and Good Color Fidelity

Closing the Deep-Blue Gap: Realizing Narrow-Band Deep-Blue Emission with Strong n-UV Excitation by Cationic Substitution for Full-Spectrum Warm W-LED Lighting

Utilization of Far-Red LED to Minimize Blue Light Hazard for Dynamic Semiconductor Lighting

Polymer‐Encapsulated Halide Perovskite Color Converters to Overcome Blue Overshoot and Cyan Gap of White Light‐Emitting Diodes

Self-adaptive Remote Phosphor Layer for PC-WLEDs with Vertical Chip

Long-Term Stable Zero-Thermal-Quenching Blue-Emitting Phosphor for Sustainable and Human-Centric Lighting

[Study on the safety of blue light leak of LED]

Efficient Energy Transfer from Trap Levels to Eu3+ Leads to Antithermal Quenching Effect in High-Power White Light-Emitting Diodes

Optimization of Illumination Performance of Trichromatic White Light-Emitting Diode and Characterization of Its Modulation Bandwidth for Communication Applications

Phosphors in Phosphor-Converted White Light-Emitting Diodes: Recent Advances in Materials, Techniques and Properties

Thermal, optical and electrical analysis on phosphor-converted white LED Chip Scale Packages with both experiment and simulation

Structural Optimization for Remote White Light-Emitting Diodes with Quantum Dots and Phosphor: Packaging Sequence Matters.

High-energy short-wave blue light conversion films via carbon quantum dots for preventing retinal photochemical damage

Tuning Color-Correlated Temperature and Color Rendering Index of Phosphorescent White Polymer Light-Emitting Diodes: Towards Healthy Solid-State Lighting

Low-concentration Ce3+-activated ScCaO(BO3) Blue-Cyan Phosphor with High Efficiency Toward Full-Spectrum White LED Applications

Ultraviolet-pumped White Light Emissive Carbon Dot Based Phosphors for Light-Emitting Devices and Visible Light Communication