Abstract:Material characterization from laboratory tests on asphalt concrete or predictions of pavement performance are meaningful only if temperature of the material is well taken into account. This paper discusses an analytical model to predict the transient temperature distribution within asphalt concrete and to determine its thermal properties. The paper also presents the laboratory test program designed to validate the model. Temperature measurements were carried out on a cylindrical specimen at different times after the specimen with a steady-state low temperature (3.5°C) was placed inside an environmental chamber in a steady-state high temperature (36°C). The temperature magnitude at different positions and its variation with time was recorded at a sampling rate of 1min−1. The analytical temperature models based on the classical planar wall and long cylinder were established to approximate the temperature distribution of asphalt concrete specimens with the geometry of a short cylinder or a beam. Thermal diffusivity as a function of thermal conductivity and heat convection is solved from the models, and then back-calculation was conducted to achieve the thermal properties using curve fitting. It was found that the analytical model could predict the measured temperatures reliably. For the materials used in this research, a thermal conductivity of 2.88W/m°C and diffusivity of 1.42×10−6m2/s were attained from the back-calculation. The time–temperature relationship, as determined from the prediction model, was found to be very sensitive to the geometric size and thermal properties of asphalt concrete.

A mathematical model to predict adiabatic temperatures from isothermal heat evolutions with validation for cementitious materials

Thermo-mechanical Performance of Layered Transversely Isotropic Media Around a Cylindrical/tubular Heat Source

Model for Hydration Heat of Cement in Concrete and Its Application

Predictive modeling of cement decomposing furnace temperature

Investigating the general mathematics model of gas-solid heat transfer in the cooling process of high temperature clinker and sintered material

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Coupled heat and moisture transfer in multi-layer building materials

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Modeling Temperature-Dependent Behavior of Soft Clay

CALCULATION OF TEMPERATURE FIELDS IN EARLY AGE CONCRETE BASED ON ADIABATIC TEST

Modeling of temperature distribution in mass concrete structure and proposal of method for identification of thermodynamic parameters

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

A new high order mathematical model for calculating the energy conservation equation

Mathematical Model and Numerical Solution of the Heat Transfer Process in the Solid Adsorption System

Mathematical modeling of cement hydration process and microstructure development

Numerical simulation of the freezing process of concrete

Modeling Hydration Properties and Temperature Developments of Early-Age Concrete Pavement Using Calorimetry Tests

Dynamic Model of Temperature Rise Caused by Cementitious Materials Hydration

Modeling temperature distribution and thermal property of asphalt concrete for laboratory testing applications

One temperature model for effective ovens

A multiscale approach to estimate the interfacial transition zone effects on the temperature rise of heterogeneous cement based materials at early age