Abstract:Developing high-temperature metallic glass thin films (MGTFs) with excellent combination properties is crucial for extending the practical applications of metallic glasses. A high-temperature multicomponent Mo-based MGTF with tunable microstructure prepared by single-target magnetron sputtering was presented in this study. Corresponding mechanical behaviors and thermal stability of MGTFs related to microstructure are systemically explored. By adjusting deposition parameters (pressure and power), the microstructure of as-deposited MGTFs can be altered from the dense homogeneous type to the loose nanoglass type. Such structure evolution can be explained by the competition between the surface diffusion and geometric shadowing effect. MGTFs with dense microstructure possess smaller surface roughness, higher hardness, higher Young's modulus, and better wear resistance. Moreover, they also possess higher thermal stability where the fully amorphous structure and smooth surface can be well maintained after annealing at 1123 K for 30 min. By contrast, the MGTF with nanoglass microstructure shows inferior mechanical properties and thermal stability due to plentiful loose interface regions, providing abundant free volumes during deformation and acting as favorable crystal nucleation sites during annealing. The correlation between the microstructure and properties of as-deposited MGTFs is clarified with the universal scaling law of glasses. The annealing treatment distinctly increases the hardness and Young's modulus of MGTFs. Meanwhile, after annealing, pop-in behaviors occur in the as-annealed MGTFs with dense microstructure but not in the as-annealed MGTF with nanoglass microstructure during the nanoindentation. These phenomena can be rationalized by the annihilation of free volumes during annealing and the evolution of the dynamical variable, shear transition zone, for the plastic deformation in MGTFs.

Magnetic anisotropy of iron-based metallic glassy fibers

Enhanced magnetocaloric and mechanical properties of melt-extracted Gd 55 Al 25 Co 20 micro-fibers

Structure and Magnetic Properties of Melt-Spun (Nd0.625ni0.375)(85)al-15 Ribbons

Magnetic and microwave properties of glass-coated amorphous ferromagnetic microwires

Metallic Glassy Thin Films: Perspective on Mechanical, Magnetic, Biomedical, and Optical Properties

Structural Origin For The Local Strong Anisotropy In Melt-Spun Fe-Ga-Tb: Tetragonal Nanoparticles

Mechanical And Magnetocaloric Properties Of Gd-Based Amorphous Microwires Fabricated By Melt-Extraction

Influence of Varying Metal-to-glass Ratio on GMI Effect in Amorphous Glass-Coated Microwires

Ferromagnetic Fe3O4 Nanofibers: Electrospinning Synthesis and Characterization

Analysis and Simulation of the Effect of Dimensions on the Properties of Glass-Coated Magnetic Alloy Microwires

Anisotropic Mechanical Response and Strain Localization of a Metallic Glassy-Fiber-Reinforced Polyethylene Terephthalate Fabric

High-temperature Mo-based Metallic Glass Thin Films with Tunable Microstructure and Mechanical Behaviors

Antiferromagnetic Mn50fe50 Wire with Large Magnetostriction

Effect of stress relaxation on soft magnetic properties of Fe76Si9B10P5 metallic glass

Metallic glass nanostructures: Forming strategies and functional applications

Fe-based glassy alloys with high iron content and high saturation magnetization

Tailoring the magnetomechanical power efficiency of metallic glasses for magneto-electric devices

Ferromagnetic Strain Glass and Its Physical Properties

Ductile FeNi-based bulk metallic glasses with high strength and excellent soft magnetic properties

Magnetic anisotropy of individual maghemite mesocrystals

Giant magnetoresistance, structural and magnetic properties of glass-coated Fe–Ni–Cu microwires