Abstract:Abstract To enable accurate characterization of the mechanical behavior of materials at the micro-scale, e.g., in micro-systems, experiments are required that are representative of the actual (often multi-axial) loading conditions to which these materials are subjected during fabrication and operation. Equally important is the acquisition of mechanical data in the form of multi-axial force measurements, and the measurement of kinematics by in-situ microscopic techniques. To this end, a micro-mechanical testing rig is here realized using commercially available piezoelectric actuators. It is shown that the setup measures forces with a resolution of $\sim 0.3$ ∼ 0.3 [mN] in the x - and y -directions, and $\sim 50$ ∼ 50 [mN] in the z -direction, over a range of 5 [N], yielding a high dynamic (force) range. Furthermore, displacements can be imposed with a resolution of $\sim 1$ ∼ 1 [nm] over a range of 200 [ μ m], in all three directions ( x , y , z ). The setup is compact, vacuum compatible, and specimens are loaded on top of the setup so that the field of view is unobstructed, allowing for in-situ testing with optical and scanning electron microscopy, and optical profilometry. A generic method is developed for extracting quasi-static forces from the piezoelectric actuators. Furthermore, challenges raised from the use of commercial actuators, for which the public technical specifications are generally incomplete, are overcome and the solution strategy is described. Proof-of-concept experiments on flexible, organic, light-emitting diodes demonstrate the potential of the setup to provide rich micro-mechanical data in the form of tri-axial force and displacement measurements. The commercial availability of the piezoelectric actuators, combined with the proposed engineering solutions lead to a generally accessible micro-mechanical test setup to investigate small-scale specimens under realistic, multi-axial loading conditions.

A Piezo-Driven Micro-Inclination Stage for Calibration of A Micro-Acceleration Transducer: Structure and Control Strategy

A piezodriven three dimensional micropositioning stage for nano-manufacturing

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

A Novel Inertial Micro-Actuator and Its Application in Positioning Mechanism

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

A Dynamic Hysteresis Model and Nonlinear Control System for a Structure-Integrated Piezoelectric Sensor-Actuator

Sub-micro-g Resolution Test of Accelerometers Based on Tilt Dynamic Modulation in Gravity Field

Design, Control and Application of a PZT-driven Micro-stage

A Low-Frequency Structure-Control-Type Inertial Actuator Using Miniaturized Bimorph Piezoelectric Vibrators

A Piezo-Driven Compliant Nanopositioning Stage with Large Stroke for Micro/Nano Manipulation

A High-Resolution Optical Displacement Detection Method for Piezoelectric Microvibratory Stage

An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning

Integrated piezoelectric micromechanical vibration platform for six degree of freedom motion

Trans‐scale Precision Positioning Stage Without Guideway Based on Inertial Stick–slip Driving

Stabilization Control of a MEMS Accelerometer With Tuned Quasi-Zero Stiffness

Fractionized Calibration of the Sample Stage Used in an AFM-probe Mechanical Testing System

A Novel Monopolar Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Driving Principle

A Piezoelectric-Drive Micro Displacement Platform for Microscanning

Step Consistency Active Control Method for Inertial Piezoelectric Actuator Using Embedded Strain Gauges.

Development of a novel micro-gripper integrating tri-axial force sensor