Abstract:With diminishing natural aggregate resources and increasing environmental protection efforts, the use of recycled fine aggregate is a more sustainable approach, although challenges persist in achieving comparable mechanical properties. Exploration into the incorporation of steel fibers with recycled aggregate has led to the development of steel-fiber-reinforced recycled aggregate concrete. This study investigates the shrinkage performance and compressive constitutive relationship of steel fiber recycled concrete with different steel fibers and recycled aggregate dosages. Initially, based on different replacement rates of recycled coarse aggregate and different volume contents of steel fiber, experimental results demonstrate that as the replacement rate of recycled coarse aggregate increases, shrinkage also increases, while the addition of steel fiber can mitigate this effect. An empirical shrinkage model for steel fiber recycled concrete under natural curing conditions is also proposed. Subsequently, based on the uniaxial compression test, findings indicate that with an increasing replacement rate of recycled fine aggregate, the peak stress and elastic modulus of concrete decrease, accompanied by an increase in peak strain, and the addition of steel fiber limits concrete crack development and enhances its brittleness while the peak stress and strain of recycled fine aggregate concrete are enhanced. However, the steel fiber volume percentage has a negligible effect on the elastic modulus. A constitutive relationship for concrete considering the effects of recycled fine aggregate and steel fiber is also proposed. This finding provides foundational support for the influence patterns of steel fiber dosage and recycled aggregate ratio on the mechanical properties of steel fiber recycled concrete.

Steel corrosion and corrosion-induced cracking in recycled aggregate concrete

Steel Corrosion and Corrosion-Induced Cracking in Reinforced Concrete with Carbonated Recycled Aggregate

Cracking of Reinforced Recycled Aggregate Concrete Beams Subjected to Loads and Steel Corrosion

Shape of corrosion-induced cracks in recycled aggregate concrete

State-of-art of corrosion-induced cracking of reinforced concrete structures

Analysis on steel corrosion at the cracking of concrete

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Performance of Recycled Concrete Beams under Sustained Loads Coupled with Chloride Ion (cl−) Ingress

Comparison on bond degradation of reinforced recycled and normal concrete

Prediction of Corrosion-Induced Concrete Cracking under External Loading and Stirrup Constraint

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Evaluating corrosion resistance of recycled aggregate concrete integrating ground granulated blast furnace slag

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Experimental Study of Mechanical Properties and Theoretical Models for Recycled Fine and Coarse Aggregate Concrete with Steel Fibers

Fractal Characteristics of Corrosion-Induced Cracks in Reinforced Concrete.

On the Penetration of Corrosion Products from Reinforcing Steel into Concrete Due to Chloride-Induced Corrosion

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Bond Behaviour of Normal/Recycled Concrete and Corroded Steel Bars