Abstract:We present a comparative study on oxidation behavior and failure mechanisms of conventional NiCoCrAl alloys doped with Y and Hf (CNA) and in-situ composite AlCoCrFeNi 2.1 eutectic high-entropy alloy doped with Y and Hf (ISC-EHEA) at 1300 °C. We demonstrate that the ISC-EHEA has much stronger resistance to surface rumpling and oxide spallation than CNA. Hybrid molecular dynamics (MD) and Monte Carlo (MC) simulations show that the diffusion coefficients of the metal elements in the Al-depletion layer of the ISC-EHEA are 50 % lower than those in the CNA. The low diffusion coefficients lead to low growth stress in the thermally grown Al 2 O 3 scale on the ISC-EHEA and improve the creep resistance of the metal in contact with the scale, thus preventing the occurrence of rumpling. The oxidation rate constant of the ISC-EHEA is ∼32 % lower in comparison to those of the CNA, which is attributed to the coarser columnar Al 2 O 3 grains that effectively mitigate grain boundary diffusion. The rumpling-free metal/oxide interface, the low residual stress and the low oxide growth rate for the ISC-EHEA result in strong resistance to scale spallation. Owing to the strong scale/alloy bonding at the interface and the build-up of strain energy during prolonged oxidation, damage in the Al 2 O 3 scale on the ISC-EHEA is initiated as surface cracks rather than interface decohesion. When re-oxidized at 1300 °C, the ingress of oxygen along the surface cracks results in fast growth of new oxides at the metal/oxide interface, which causes local stress concentration, interface crack propagation and scale spallation.

Ex-situ Observation on the Dissolution Behaviour of Ni–16Cr–15Mo and Ni–30Co–16Cr–15Mo Alloys in Hydrofluoric Acid

Investigation of electrochemical dissolution behavior of Ni(γ)/Ni3Al(γ') and Co(γ)/Co3Al(γ') superalloys in NaNO3 solution

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Corrosion and mechanical behavior of amorphous-nanocrystalline NiCrMo coatings

Corrosion Behavior of Ultrafine-Grained CoCrFeMnNi High-Entropy Alloys Fabricated by High-Pressure Torsion

Corrosion Behavior of FeCoNiCrAl High-Entropy Alloy in Molten NaNO3-KNO3

The deformation behavior and mechanism modeling of a corrosion-resistant Ni-Cr-Mo alloy with nanoscale precipitates at room and elevated temperatures

Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments

Characterization of microstructure, grain distribution, and tribocorrosion properties of NiTi-based alloy

Insight into the corrosion resistance of Mo-added NiCrBSi coating in simulated waste incineration environment

Influence of Mo on the Microstructure and Corrosion Behavior of Laser Cladding FeCoCrNi High-Entropy Alloy Coatings

Intergranular corrosion of Ni-30Cr in high-temperature hydrogenated water after removing surface passivating film

A comparative study on the oxidation behavior and failure mechanisms of conventional NiCoCrAl alloy and in-situ composite AlCoCrFeNi 2.1 eutectic high-entropy alloy at 1300 °C

Electrochemical Impedance Spectra for the Corrosion of Porous Cu-35mass%Ni-(5,10)mass%Cr Alloys in Molten (0.62li,0.38k)2co3 at 650 °C in Air

Tribological and electrochemical behaviors of FeCoNiCrMox HEA coatings prepared by internal laser cladding on 316L steel tube

Corrosion Behavior of a Ni–Cr–Mo Alloy Coating Fabricated by Laser Cladding in a Simulated Sulfuric Acid Dew Point Corrosion Environment

New studies on wear and corrosion behavior of laser cladding FeNiCoCrMox high entropy alloy coating: The role of Mo

Microstructural evolution and element interdiffusion of NiAlHf and NiAlHfY coatings deposited on a Ni-based superalloy

Thermomechanical response and strengthening effect of femtosecond laser-irradiated CoCrFeNi high-entropy alloy films

Effect of Mo on microstructure, mechanical and corrosion properties of FeCrNiMnMox high-entropy alloys

Microstructures, Hardness and Corrosion Behaviors of FeCoNiNb0.5Mo0.5 and FeCoNiNb High-Entropy Alloys