Abstract:Highlights • Evolution law of long-period stacking ordered phase (LPSO) in Mg-Gd-Y-Zn alloy and its effect on mechanical properties were investigated. • First-principles calculations for 14H and 18R LPSO phases regarding thermodynamic and mechanical properties were carried out. • Superlattice structure of the LPSO phase folds the fermi surface of the brillouin zone, resulting in an increase in the elastic modulus of the LPSO phase. • Long-range interactions caused by the LPSO phase play a crucial role in suppressing dislocation motion. Based on experiments and first-principles calculations, the microstructures and mechanical properties of as-cast and solution treated Mg-10Gd-4Y-xZn-0.6Zr ( x = 0, 1, 2, wt.%) alloys are investigated. The transformation process of long-period stacking ordered (LPSO) structure during solidification and heat treatment and its effect on the mechanical properties of experimental alloys are discussed. Results reveal that the stacking faults and 18R LPSO phases appear in the as-cast Mg-10Gd-4Y-1Zn-0.6Zr and Mg-10Gd-4Y-2Zn-0.6Zr alloys, respectively. After solution treatment, the stacking faults and 18R LPSO phase transform into 14H LPSO phase. The Enthalpies of formation and reaction energy of 14H and 18R LPSO are calculated based on first-principles. Results show that the alloying ability of 18R is stronger than that of 14H. The reaction energies show that the 14H LPSO phase is more stable than the 18R LPSO. The elastic properties of the 14H and 18R LPSO phases are also evaluated by first-principles calculations, and the results are in good agreement with the experimental results. The precipitation of LPSO phase improves the tensile strength, yield strength and elongation of the alloy. After solution treatment, the Mg-10Gd-4Y-2Zn-0.6Zr alloy has the best mechanical properties, and its ultimate tensile strength and yield strength are 278.7 MPa and 196.4 MPa, respectively. The elongation of Mg-10Gd-4Y-2Zn-0.6Zr reaches 15.1, which is higher than that of Mg-10Gd-4Y0.6Zr alloy. The improving mechanism of elastic modulus by the LPSO phases and the influence on the alloy mechanical properties are also analyzed.

Abundant long period stacking ordered structure induced by Ni addition into Mg–Gd–Zn alloy

Local Lattice Distortion Mediated Formation of Stacking Faults in Mg Alloys

Effect of the Morphology of Long-Period Stacking Ordered Phase on Mechanical Properties and Corrosion Behavior of Cast Mg-Zn-Y-Ti Alloy

Formation of Long Period Stacking Structures in Mg-Gd-Y-Zn Alloy Studied by In-Situ Quasi-Dynamic Back-Scattering Electron Microscopy

The Effect of Morphology of the Long-Period Stacking Ordered Phase on Mechanical Properties of the Mg-7Gd-3Y-1Nd-1Zn-0.5Zr (wt.%) Alloy

Transformation of long-period stacking ordered structures in Mg-Gd-Y-Zn alloys upon synergistic characterization of first-principles calculation and experiment and its effects on mechanical properties

Effect of Alloying Elements on the Formation and Structural Features of Long Period Stacking Structures in As-Cast Mg Alloys

Effects of an LPSO Phase Induced by Zn Addition on the High-Temperature Properties of Mg-9Gd-2Nd-(1.5Zn)-0.5Zr Alloy

Direct Observation and Characterization of a Novel Long Period Stacking Ordered Phase in GH4169 Alloy

Incoherent long period stacking ordered phases and age-hardening in Mg-Gd-Ga alloys

In-situ investigate on the microstructure evolution, deformation and fracture mechanism of Mg-Gd-Zn-Mn alloy with varies of LPSO volume fraction

Influence of rare-earth addition on the long-period stacking ordered phase in cast Mg–Y–Zn alloys

Effect of long period stacking ordered structure on the biocorrosion resistance and osteogenesis ability of Mg–Zn–Y-Mn alloys

Effect of Al addition on microstructure and mechanical properties of Mg−Gd−Zn alloys

Effect of long-period stacking ordered structure on very high cycle fatigue properties of Mg-Gd-Y-Zn-Zr alloys

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Long-period Stacking Ordered Structures in Mg–3Cu–1Mn–2Zn–1Y Damping Alloy

A Study on the Damping Capacities of Mg–Zn–Y-Based Alloys with Lamellar Long Period Stacking Ordered Phases by Preparation Process

Experiment and first-principles calculation to investigate the phenomenon of Gd and Y elemental enrichments in the long-period stacking ordered phase

Effect of Al Addition on Grain Refinement and Phase Transformation of the Mg-Gd-Y-Zn-Mn Alloy Containing LPSO Phase

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys