Abstract:Polyvinyl chloride (PVC) is the most widely used general flame-retardant plastic worldwide; however, the large number of plasticizers added during processing significantly reduces its flame-retardant property. To prepare a new type of PVC material with highly efficient flame retardancy and smoke suppression, antimony trioxide (Sb2O3), talc powder, hydromagnesite, and zinc borate were added in different proportions to PVC to explore the flame-retardant properties, thermal weight, smoke density (Ds), and mechanical properties of the composite materials. Results showed that the limiting oxygen index value of each group was higher than 27% after adding talc powder, magnesite, and zinc borate to replace part of the Sb2O3. This value was within the refractory-grade level and indicated a good flame retardancy performance. The replacement effect was in line with the experimental expectation. The lowest Ds peak value was 656.4 when the flame retardants were added with 10 wt% Sb2O3, 50 wt% hydromagnesite, 20 wt% talc, and 20 wt% Zn3BO6. Compared with pure Sb2O3 as a flame retardant, the Ds peak value decreased by 46.7%. The thermogravimetric decomposition temperature of the composites in each group was generally higher than that of the group with pure Sb2O3 as a flame retardant, increasing by 45.3 °C. The thermal stability of the composites was improved, and the elongation at the break and tensile strength were 234.9% and 25.8 MPa, respectively, indicating good mechanical properties. The results showed that using compound flame retardants to replace most of the Sb2O3 is an effective technique for obtaining good flame retardancy and mechanical properties of PVC. This study, not only reduced the manufacturing cost of flame-retardant PVC, but also effectively reduced its smoke density and the time to reach the highest smoke density, which provided a research reference for the application and promotion of flame-retardant PVC.

The Damping and Flame‐retardant Properties of Poly(vinyl Chloride)/chlorinated Butyl Rubber Multilayered Composites

Damping behavior of chloridized butyl rubber/ethylene propylene diene monomer composites with alternate-layered structure

Multilayered damping composites with damping layer/constraining layer prepared by a novel method

High rubber elasticity and thermal conductivity in plasticized polyvinyl chloride film with flame retardancy and smoke suppression properties

Flame-retarding and Mechanical Properties of Alternating Multilayered Composites Consisting of PP and Flame Retardant Filled PP Layers

Structure and properties of damping chlorinated butyl rubber composites with hyperbranched polyester grafted hindered phenol

The Multilayered Distribution of Intumescent Flame Retardants and Its Influence on the Fire and Mechanical Properties of Polypropylene

Fire Behavior and Failure Model of Multilayered Wood Flour/HDPE/Polycarbonate Composites with a Sandwich Structure

Flame-Retarding and Mechanical Properties of Polybutylene Terephthalate(PBT)/Flame Retardant Filled PBT Multilayer Composites

Achieving Enhanced Fire Safety of Polyvinyl Chloride Through Rapid Catalytic Carbonization Using a Triple-effect Flame Retardant of Mg(OH)2-ZnO-TiO2

Effects of Polyether Titanate Coupling Agent on the Flame Retardancy and Mechanical Properties of Soft Poly(vinyl Chloride)/basic Magnesium Carbonate Composites

The Flame Retardancy and Smoke Suppression Performance of Polyvinyl Chloride Composites with an Efficient Flame Retardant System

Damping characteristics of a multilayered constrained beam using viscoelastic butyl rubber layer with wide temperature range

Synthesis of Transition Metal Complexes and Their Effects on Combustion Properties of Semi-Rigid Polyvinyl Chloride

RETRACTED ARTICLE: Preparation of Multilayers Zinc Hydroxystannate Microcapsules and its Application in Flame-Retardant PVC Composites

Damping mechanism of chlorobutyl rubber and phenolic resin vulcanized blends

Damping Characteristics of Chlorobutyl Rubber/Poly(Ethyl Acrylate)/Piezoelectric Ceramic/Carbon Black Composites

Molecular-Level Insight of CP52/NBR Damping Composites through a Combination of Molecular Dynamics Simulation and Experimental Method

Thermal and flame-retardant properties of multilayered composites prepared through novel multilayering approach

Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend

Effects of Chlorinated Polyethylene and Antimony Trioxide on Recycled Polyvinyl Chloride/acryl-Butadiene-styrene Blends: Flame Retardancy and Mechanical Properties