Abstract:Polyhedral oligomeric silsesquioxane (POSS) is a nanostructured soft material that tremendously influences the properties of polymers. This paper delineates the preparation of polyurethane–POSS hybrid materials by physical blending and in-situ polymerization, and studies their properties. In the physical blending method, a polyurethane (BDO–PU) was prepared by using polycaprolactone diol (PCL-diol) as a soft segment, 4,4(^prime )-methylenebis(phenyl isocyanate) (MDI) as a diisocyanate and 1,4-butanediol (BDO) as a chain extender. The PU–POSS hybrid material (BDO–PU/POSS) was then prepared by the dispersion of POSS (octahydroxy POSS) molecules in the synthesized BDO–PU matrix by the solution mixing method. In the in-situ polymerization method, POSS–PU and POSS–BDO–PU hybrid materials were prepared using POSS and the combination of POSS and BDO as a crosslinker or a chain extender. The formation of PU and PU–POSS hybrid materials was confirmed by Fourier transform infrared and differential scanning calorimetry analyses. The introduction of octahydroxy POSS molecules into the PU matrix resulted in a reduction of glass transition temperature ((T_{mathrm {g}})). However, POSS–PU hybrid materials prepared by the in-situ polymerization method had significantly less (T_{mathrm {g}}) compared to the hybrid materials prepared by the solution or physical blending method. The incorporation of POSS molecules by using the in-situ polymerization process resulted in an increase in the surface hydrophobicity (water contact angle, WCA (=) 125(^{circ })) compared to the same prepared by using the solution blending process (WCA (=) 106(^{circ })). Moreover, the WCA values of all hybrid materials (WCA (=) 106–125(^{circ })) are much higher than those of the pristine BDO–PU (WCA (=) 84(^{circ })). The higher WCA value of the hybrid materials is due to the combined effect of the hydrophobic nature of POSS molecules as well as the increased surface roughness, as evidenced by the AFM 3D images. The hybrid materials prepared by the in-situ polymerization method exhibited improved mechanical and thermal properties compared to those prepared by the solution blending method.

Polyurethane electrospun mats strengthened and toughened by physically blended polyhedral oligomeric silsesquioxane

Studies of polyhedral oligomeric silsesquioxane and polyhedral oligomeric silsesquioxane- polymer

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Polyhedral Oligomeric Silsesquioxane (POSS) As Reinforcing Agent for Waterborne Polyurethane Coatings on Wood

Polyurethane Networks Nanoreinforced By Polyhedral Oligorneric Silsesquioxane

Structural development during deformation of polyurethane containing polyhedral oligomeric silsesquioxanes (POSS) molecules

Mechanically Robust Hybrid POSS Thermoplastic Polyurethanes with Enhanced Surface Hydrophobicity

Fabrication of Liquid Crystalline Polyurethane/Polyhedral Oligomeric Silsesquioxane Nanofibers via Electrospinning

Improvement of Epoxy Resin with Glycidyl-Polyhedral Oligomeric Silsesquioxanes

Polyhedral Oligomeric Silsesquioxane/silica/polydimethylsiloxane Rubber Composites with Enhanced Mechanical and Thermal Properties

Influences of polyhedral oligomeric silsesquioxane (POSS) on tensile properties of polystyrene

POSS/Polyurethane Hybrids and Nanocomposites: A Review on Preparation, Structure and Performance

Studies On The Influences Of Polyhedral Oligomeric Silsesquioxane (Poss) On Tensile Properties Of Polystyrene

Atomistic Finite Element Simulations on the Tensile Properties of Polyhedral Oligomeric Silsesquioxane (POSS) Reinforced Polystyrene

Synergistic enhancement of the robustness of multifunctional polyurethane via an ionic noncovalent cross-linking network and aromatic disulfides

The strengthening mechanism of mechanical performance for polyurethanes with micro-content crosslinkers

The Chain Dis-Entanglement Effect of Polyhedral Oligomeric Silsesquioxanes (POSS) on Ultra-High Molecular Weight Polyethylene (UHMWPE)

The enhanced encapsulation capacity of polyhedral oligomeric silsesquioxane-based copolymers for the fabrication of electrospun core/shell fibers

Polyurethane Networks Modified with Octa(Propylglycidyl Ether) Polyhedral Oligomeric Silsesquioxane

Polyurethane–POSS hybrid materials: by solution blending and in-situ polymerization processes

Study of POSS Modified Polyurethane Aqueous Dispersions Emulsions