Abstract:A polyoxymethylene/graphene nanocomposite is fabricated. Graphene is modified using liquid‐phase exfoliation and KH‐550. Enhanced tribomechanical behavior is achieved with 0.5 wt% graphene, ameliorated load transfer and lubricious transfer film on the interface. In this study, a viable route to the development of a high‐performance polyoxymethylene (POM)‐based nanocomposite is proposed to overcome tribomechanical‐related issues in high‐precision sliding parts. Prior to melt‐blending, graphene nanoplatelet (GNP) filler was processed via a series of liquid‐phase exfoliation and surface modification with 3‐aminopropyltriethoxysilane. Results indicate that GNP is successfully exfoliated with minimum defect ratio and improves interfacial bonding within the matrix. Uniform dispersion and stable load‐transfer capability of POM/GNP with 0.5 wt% loading significantly enhanced flexural, tensile and impact strength by overall 26.4%, in contrast to unfilled POM. Dry friction tests against a steel ball also showed the lowest reduction in friction coefficient and wear rate by 22% and 40.6%, respectively, at the same amount of GNP loading due to the large specific surface coverage and lubricious transfer film chelation onto the steel counterface. Furthermore, dissipated energy accumulation by friction work was calculated in the sliding interfaces based on friction force–displacement hysteresis loop where the POM/GNP 0.5 wt% wear surface consumed ca 21.7% less energy in a dry frictional shearing process compared to neat POM. However, lack or excess loading of processed GNP exhibited insufficient or poor matrix–filler adhesion and led to deterioration of the composite properties due to particle agglomeration which can cause stress concentration and serve as a failure site. The adoption of the proposed methodology would demonstrate excellent material characteristics in thin‐walled precision parts where both mechanical and tribological performances are the primary concern. © 2024 Society of Chemical Industry.

Poly(Ether Ether Ketone)/Wrapped Graphite Nanosheets With Poly(Ether Sulfone) Composites: Preparation, Mechanical Properties, And Tribological Behavior

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Modified Graphene/Polyimide Nanocomposites: Reinforcing And Tribological Effects

Preparation and tribological behaviors of poly (ether ether ketone) nanocomposite films containing graphene oxide nanosheets

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

Molecular Dynamics Simulation and Experimental Study of the Mechanical and Tribological Properties of GNS-COOH/PEEK/PTFE Composites

Preparation and Tribological Behaviors of Lubrication-Enhanced PEEK Composites

Simultaneous Improvements in Wear Resistance and Mechanical Properties of Uhmwpe Nanocomposite Fabricated Via A Facile Approach

Tribological and mechanical endowments of polyoxymethylene by liquid‐phase exfoliated graphene nanofiller

Mechanical Properties of Polydicyclopentadiene/graphite Nanosheet Composites Prepared by Reaction Injection Moulding

Tribological and mechanical characterization of carbon-nanostructures based PEEK nanocomposites under extreme conditions for advanced bearings: A molecular dynamics study

The Research of Polyetheretherketone Based Composite Coatings

Wear resistant PEEK composites with great mechanical properties and high thermal conductivity synergized with carbon fibers and h‐BN nanosheets

Preparation and tribological properties of porous polyimide modified by graphene

Tribological Behavior and Mechanical Properties of Graphene/PEEK Composites

Effect of Various Type of Nanoparticles on Mechanical and Tribological Properties of Wear-Resistant PEEK + PTFE-Based Composites

Mechanochemical functionality of graphene additives in ultralow wear polytetrafluoroethylene composites

Self-Lubricating PTFE-Based Composites with Black Phosphorus Nanosheets

Friction and wear characteristics of synthetic diamond and graphene-filled polyether ether ketone composites

Enhanced Wear Resistance of High-Density Polyethylene Composites Reinforced by Organosilane-Graphitic Nanoplatelets