Abstract:A polyoxymethylene/graphene nanocomposite is fabricated. Graphene is modified using liquid‐phase exfoliation and KH‐550. Enhanced tribomechanical behavior is achieved with 0.5 wt% graphene, ameliorated load transfer and lubricious transfer film on the interface. In this study, a viable route to the development of a high‐performance polyoxymethylene (POM)‐based nanocomposite is proposed to overcome tribomechanical‐related issues in high‐precision sliding parts. Prior to melt‐blending, graphene nanoplatelet (GNP) filler was processed via a series of liquid‐phase exfoliation and surface modification with 3‐aminopropyltriethoxysilane. Results indicate that GNP is successfully exfoliated with minimum defect ratio and improves interfacial bonding within the matrix. Uniform dispersion and stable load‐transfer capability of POM/GNP with 0.5 wt% loading significantly enhanced flexural, tensile and impact strength by overall 26.4%, in contrast to unfilled POM. Dry friction tests against a steel ball also showed the lowest reduction in friction coefficient and wear rate by 22% and 40.6%, respectively, at the same amount of GNP loading due to the large specific surface coverage and lubricious transfer film chelation onto the steel counterface. Furthermore, dissipated energy accumulation by friction work was calculated in the sliding interfaces based on friction force–displacement hysteresis loop where the POM/GNP 0.5 wt% wear surface consumed ca 21.7% less energy in a dry frictional shearing process compared to neat POM. However, lack or excess loading of processed GNP exhibited insufficient or poor matrix–filler adhesion and led to deterioration of the composite properties due to particle agglomeration which can cause stress concentration and serve as a failure site. The adoption of the proposed methodology would demonstrate excellent material characteristics in thin‐walled precision parts where both mechanical and tribological performances are the primary concern. © 2024 Society of Chemical Industry.

Enhanced Wear Resistance of High-Density Polyethylene Composites Reinforced by Organosilane-Graphitic Nanoplatelets

Synergistic Effects of Hybrid Graphitic Nanofillers on Simultaneously Enhanced Wear and Mechanical Properties of Polymer Nanocomposites

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Simultaneous Improvements in Wear Resistance and Mechanical Properties of Uhmwpe Nanocomposite Fabricated Via A Facile Approach

Comparison Of Tribological Performances Of High Density Polyethylene Enhanced With Carbon Nanofibers

Tribological Behavior of High Density Polyethylene Nanocomposites with Silane Treated Carbon Nanofibers

Mechanical Properties, Tribological Behavior, and Biocompatibility of High-Density Polyethylene/carbon Nanofibers Nanocomposites

Wear of Carbon Nanofiber Reinforced HDPE Nanocomposites Under Dry Sliding Condition

Preparation and utility of a self-lubricating & anti-wear graphene oxide/nano-polytetrafluoroethylene hybrid

Molecular Dynamics Simulation of Mechanical and Tribological Properties of Ultrahigh Molecular Weight Polyethylene Enhanced by Modified Silica Nanoparticles

Tribological and mechanical endowments of polyoxymethylene by liquid‐phase exfoliated graphene nanofiller

Microstructural, mechanical, and tribological properties of a novel hybrid LLDPE/PTFE/x wt.% GNPs for bearing surface applications

Wear and Friction of Carbon Nanofiber-Reinforced Hdpe Composites

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

Ultralow Friction and Wear of Polymer Composites under Extreme Unlubricated Sliding Conditions

Wear‐resistant layers containing graphene derivatives

Preparation and tribological behaviors of poly (ether ether ketone) nanocomposite films containing graphene oxide nanosheets

Modified Graphene/Polyimide Nanocomposites: Reinforcing And Tribological Effects

Enhanced tribological properties of polyimide composite with carbon fiber/graphitic‐carbon nitride nanosheets

Tribological characteristics of graphene nanoplatelets-filled PTFE under dry sliding and sea water environmental conditions