Abstract:The inhomogeneous pore structure and lack of polar groups in lithium metal battery separators lead to uneven transport of Li + through the separator, the uneven flux of Li + , and eventually the formation of lithium dendrites. Therefore, to provide uniform Li + transport and inhibit the growth of lithium dendrites, a polydopamine-modified cellulose membrane (PDA-CM) was created by oxidative self-polymerizing dopamine and binding it to the surface and interface of the cellulose membrane through hydrogen bonds. The successful preparation of the PDA-CM separator by PDA-modified cellulose membrane by hydrogen bonds was proved by the FT-IR test. TGA, thermal shrinkage test, tensile strength test, FESEM, and porosity test results indicated that neither the PDA-CM nor the CM separators shrank at 160 °C, the PDA-CM separator also had better tensile strength (Stress = 31.1 MPa), and uniform pores (Porosity = 54.95 %) with homogeneous Li + flux. The polar functional groups (-NH- and -OH) in PDA improved the electrolyte uptake rate (Electrolyte uptake rate = 469.77 %), the electrolyte retention (Electrolyte retention = 409.04 %), and electrolyte wettability (Contact angle = 18.35°) of the separator and promoted the uniform distribution of Li + through the PDA-CM separator. In addition, the PDA-CM separator had better ionic conductivity (1.54 × 10 −3 S·cm −1 ) and lower impedance (849 Ω). The catechol on the PDA molecule created strong adhesion between the separator and the lithium metal, reduced the local tension on the surface of the lithium metal and inhibited dendrite growth. The lithium metal anode remained smooth after cycling. The lithium metal battery prepared by the PDA-CM separator showed decent cycle performance and remained a high capacity retention rate (90.48 %) after 100 cycles. This study provides a new solution for the modification of cellulose-based lithium metal battery separators, which can achieve uniform transmission of Li + , inhibit the growth of lithium dendrites, and improve battery performance.

Polydopamine Hydrophilic Modification of Polypropylene Separator for Lithium Ion Battery

Polypropylene Separator Coated with a Thin Layer of Poly(lithium Acrylate‐co‐butyl Acrylate) for High‐performance Lithium‐ion Batteries

Self-Polymerized Dopamine Nanoparticles Modified Separators for Improving Electrochemical Performance and Enhancing Mechanical Strength of Lithium-Ion Batteries.

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

Modification of Polypropylene Separator with Multifunctional Layers to Achieve Highly Stable Sodium Metal Anode

Improving the wettability and thermal resistance of polypropylene separators with a thin inorganic–organic hybrid layer stabilized by polydopamine for lithium ion batteries

Polydopamine-assisted in Situ Formation of Dense Aramid Nanofibers Layer on Polyethylene Separator for Lithium-Ion Battery

Preparation and performance of polypropylene separator modified by SiO2/PVA layer for lithium batteries

Polypropylene Separators with Robust Mussel-inspired Coatings for High Lithium-ion Battery Performances

Surface Coating on a Separator with a Reductive Solid Li-Ion Conductor for Dendrite-Free Li-Metal Batteries

Application of Polyethylene Separator Modified by Methyl Acrylic Polymer in Lithium Ion Battery

Enhanced Wettability and Thermal Stability of Polypropylene Separators by Organic–inorganic Coating Layer for Lithium‐ion Batteries

Aramid Nanofibers/Polydopamine Coating Polyethylene Separator for Lithium-Ion Battery

A New Polysulfide Blocker - Poly(acrylic Acid) Modified Separator for Improved Performance of Lithium-Sulfur Battery

Regulating Li ions transportation and deposition with Polydopamine/Polyethyleneimine Functional Separator for Superior Li Metal Battery

Polyhedral Oligomeric Silsesquioxane Modified Polyolefin Separator for Advanced Lithium–Metal Batteries

Empowering polypropylene separator with enhanced polysulfide adsorption and reutilization ability for high-performance Li-S batteries

Polydopamine-modified cellulose-based composite separator for inhibiting dendritic growth of lithium metal batteries

A Bioinspired Functionalization Of Polypropylene Separator For Lithium-Sulfur Battery

Polyphenols Assisted Silica Coating on Polypropylene Separators with Improved Wettability and Heat‐resistance for Lithium‐ion Batteries

Fast Assemble of Polyphenol Derived Coatings on Polypropylene Separator for High Performance Lithium-Ion Batteries