Abstract:The polyhedral oligomeric silsesquioxane (POSS) based fluorinated acrylate copolymer was successfully synthesized via free radical solution polymerization, which was confirmed by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). POSS and fluorinated monomers were separately introduced into the reaction. The copolymer solution was firstly prepared by dissolving the copolymer in a solvent mixture of 1,1,2-trichlorotrifluoroethane (F113) and ethyl acetate (EA). The copolymer film was then fabricated by simply drop-casting one layer of the solution on glass substrate. The influence of the volume ratio of EA to F113 on the microstructure morphology, element component, roughness and hydrophobicity of the film surface were investigated by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and contact angle instrument. The experimental results revealed that POSS aggregated on the top of the film and formed nanoscale particles, which led to rough film surface withgreat hydrophobicity. The complex and rough structure was simply fabricated due to the effect of both POSS aggregation and organic microphase separation between the fluorinated and non-fluorinated segments. Although fluorinated segments and POSS were competed to migrate onto the film surface, the content of POSS aggregation on the surface would decrease alone with the increase of F113 in the solvent mixture, while fluorine content was contrary to that. Consequently, both the surface roughness and surface energy decreased. The phenomenon suggested that F113 was helpful for fluorinated segments to migrate onto the film surface, which ensured much more room for fluorinated parts on the surface and reasonably restrained the capability of POSS aggregation on the surface. The hydrophobicity of the film increased with the content of F113. With pure F113 as the solvent, the contact angle of the film formed increased to the maximum of 135.0 degrees, demonstrating well-performed hydrophobicity. At the same time, the fluorine content and average roughness of the film surface were 45.25% and 93.4 nm, respectively.

Synthesis Of Fluorosilicone Monomer And Application In Hydrophobic Surface Of Acrylic Copolymer

Synthesis and properties of alkoxysilane-modified acrylic latex via miniemulsion polymerization

Synthesis and characterization of acrylic latex: Effects of fluorine and silicon components on properties of the latex copolymers

Preparation and Characterization of Copolymer Containing Fluorine-Silicon with Low Surface Energy

Synthesis of fluorinated monomer and formation of hydrophobic surface therefrom

Synthesis and Surface Properties of SiO2 Modified Fluorosilicone Acrylic Copolymer Hybrids

Preparation and Characterization of Acrylate Copolymers Modified by Fluorine and Silicon for Application in Release Films

Study on the Synthesis and Superhydrophobic Properties of Fluorinated Copolymers with Carboxyl Group

Study on Synthesis of Fluorinated Acrylate Copolymer and Surface Hydro-Oleophobic Properties of the Copolymer Films

Properties and Characterization of Novel Cationic Polyacrylate Latex Containing Fluorine and Silicon Prepared with Soap-Free Emulsion Polymerization

Preparation of fluorinated polysiloxane and its application in modified polyacrylates

Surface topography and hydrophobicity of waterborne fluorinated acrylic/silica hybrid coatings

Synthesis and Characterization of Hybrid Fluoro‐emulsion Based on Silica/copolymer Composite Particles

Surface Characterization of Trimethoxysilane-Containing High-Solid Hydroxyl Acrylic Resin Films

Synthesis and Application of Fluorosilicone Polymer

Effects of fluorine and silicon components on the hydrophobicity failure behavior of acrylic polyurethane coatings

Surface Microphase Separation and Hydrophobicity of POSS Based Fluorinated Acrylate Copolymer

Synthesis and Properties of Waterborne and Air-drying Fluorosilicon Modified Acrylic Resins Based on Orthogonal Experiment Design

The Study of the Acrylate Copolymer Emulsion Containing Fluorine

Synthesis and Characterization of Polyacrylate Latex Containing Fluorine and Silicon