Abstract:In this study, we identified a specific phenomenon of coordinated deformation of twins in near-alpha titanium alloys during dwell fatigue (DF). The main crack source regions and internal cracks in the micro-texture region (MTR) and no-MTR samples with inconsistent orientation characteristics were characterized. The results demonstrate that the main cracks in all specimens are aligned with the (0001) basal plane, which is associated with basal slip. Notably, twins are found and confirmed to be involved in the DF crack initiation process in high Al content near-alpha Ti60 alloys where deformation twins are rare, and tend to nucleate at the DF basal cracks. Further in-situ dwell investigation reveals and proposes that the dislocation pile-up and prismatic-basal (PB) interfacial features between soft/hard grains lead to deformation twin nucleation and growth from hard grain boundaries. Concurrently, the pyramidal (c+a) dislocation slip is observed to be in concurrent operation with the induced twins. These findings suggest that deformation twins not only coordinate basal grain deformation but also hinder the initiation and propagation of basal cracks caused by basal (a) slip. Moreover, a high density of pyramidal (c+a) dislocations within the twin and their dissociation to form basal stacking faults (SFTs) with a specific nanometric spacing make the twinning process accompanied by significant lattice distortions inside the twin. These newly formed nanotwin boundaries and SFTs act as barriers to dislocation motion, enhancing the strength and DF lifetime of near-alpha Ti60 alloys and effectively reducing the dwell sensitivity of no-MTR alloys. Our findings extend the understanding of the coordinated roles of dislocation slip, twin nucleation and formation of basal SFTs in near-alpha titanium alloys in dwell fatigue.

Deformation twinning induced by micropores in TMS-75 superalloy

Deformation Micro-Twinning Arising at High Temperatures in a Ni-Co-based Superalloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Formation and Annihilation of Deformation Twinning in Hexagonal Ti with Lamellar Microstructure

Failure-mode dependence on the formation of deformation twinning in the fourth-generation single crystal Ni-based superalloy at high temperatures

Stress-induced Crystallographic and Microstructural Evolution for Hierarchically Twinned Martensite in Single- and Dual-Phase Ni-Mn-Ga Alloys

Twinning and Its Effect on the Evolution of Acicular Α in Ti–5Al–5Mo–5V–3Cr–1Zr

Molecular dynamics simulation of thermomechanical fatigue properties of Ni-based single crystal superalloys

Ear-Α Titanium Alloy Dwell Load-Induced Deformation Twinning to Coordinate the Deformation Mechanism Associated with Crack Initiation

Microtwinning mechanism revealed by its orientation dependence and tension-compression asymmetry in γ′ precipitate-strengthened Ni-based superalloys

Twinning behavior of orthorhombic-α" martensite in a Ti-7.5Mo alloy

Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti65

Deformation Twins and Stacking Faults in an AA5182 Al-Mg Alloy Processed by High Pressure Torsion

Mechanical Twinning and Dislocation Slip Multilayered Deformation Microstructures in Β-Type Ti–Mo Base Alloy

Deformation induced face-centered cubic titanium and its twinning behavior in Ti–6Al–4V

The Formation of {101̅2} Deformation Twin in Hybrid TiB-TiC Reinforced Titanium Matrix Composites

High-temperature tensile properties and strengthening mechanism of cryo-rolled MP159 superalloy strengthened by deformation nano-twins

Twinning-induced dislocation and coordinated deformation behavior of a high-Nb TiAl alloy during high-cycle fatigue

Deformation Twinning of Molecular Dynamics Simulation in a Ternary Titanium Alloy under Nanoindentation

Influences of Stress Triaxiality and Forming Parameters on Microstructural Evolution and Fracture Mechanisms in a Ni-Cr-Mo-based Superalloy

Effects of Nano-Twinning on the Deformation and Mechanical Behaviours of TiAl Alloys with Distinct Microstructure at Elevated Loading Temperatures