Design and implementation of timing system for single-shot imaging at Shanghai soft X-ray free-electron laser
Yong-Gan Nie,Zi-Chen Gao,Ya-Jun Tong,Jia-Dong Fan,Gong-Fa Liu,Huai-Dong Jiang,National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China,Center for Transformative Science, ShanghaiTech University, Shanghai 201210, China
DOI: https://doi.org/10.7498/aps.73.20240383
IF: 0.906
2024-06-20
Acta Physica Sinica
Abstract:Author(s): Nie Yong-Gan, Gao Zi-Chen, Tong Ya-Jun, Fan Jia-Dong, Liu Gong-Fa, Jiang Huai-Dong X-ray free-electron laser (XFEL), as a novel advanced X-ray light source, has excellent properties such as ultra-high brightness, ultra-shot pulse duration, and full coherence. The coherent X-ray diffraction imaging (CDI) has a lot of advantages at high resolution and quantitative imaging compared with the traditional lens based X-ray imaging methods. By combining the excellent properties of XFEL and advantages of CDI, the single-shot imaging has been realized, based on the concept of "diffraction before destruction". Shanghai soft X-ray free-electron laser facility (SXFEL) is the first XFEL facility operated at the X-ray wavelength in China. The coherent scattering and imaging (CSI) endstation is the first commissioned endstation at SXFEL, focusing on the high spatiotemporal imaging for nano materials and micro materials by using a single-shot imaging method. To realize the single-shot experiment at XFEL, especially for single-shot imaging, the timing system plays a crucial role in ensuring the operation of the equipment in sequence. This paper introduces the design and implementation process of SXFEL single-shot imaging timing. The timing system is implemented with White Rabbit (WR) and digital delay and pulse generator (BNC505). Single-shot imaging is realized by synchronously moving the sample scanning stages and X-ray shutter to select a single pulse to illuminate the sample. At the same time, the X-ray detector is triggered with the timing system to record the single-shot diffraction pattern. During debugging, a gold nanodisks each with a side length of approximately 300 nm and a thickness of about 30 nm, as test samples, are imaged at the CSI endstation. The nanodisks are uniformly dispersed on Si<sub<3< $\end{document}<="" (prtf).="" 1="" 22.1="" 22.6="" 50="" <<="" <<graphic="" <\begin{document}$="" <inline-formula<<tex-math="" a="" accurately="" after="" alternatives<<="" an="" and="" applied="" are="" at="" be="" because="" below="" by="" calculating="" can="" citation="" control="" corresponding="" curve="" cutoff="" designed="" detector.="" determined="" diffraction="" dropping="" each="" estimated="" finally,="" focus="" for="" frequency="" from="" function="" half="" holes="" hz="" id="M3" image="" imaging="" imaging.="" inline-formula<,="" intensity="" interval="" intervals="" ionized="" is="" meeting="" membrane="" membranes="" nm.="" obtain="" of="" on="" p="" pattern="" patterns="" peak="" performed="" period="" phase="" phase-retrieval="" process,="" prtf="" pulse="" raster="" real-space="" recognized.="" reconstructed="" recorded="" requirement="" resolution="" results="" retrieval="" sample.="" samples="" scan="" scanning,="" sequence="" shot.="" show="" shutter,="" si<sub<3<="" single-shot="" spatial="" specific-use="print" spot,="" sub<="" sub<n<sub<4<="" sup<,="" sxfel.<="" system="" tex-math<<alternatives<<graphic="" that="" the="" time="" timing="" to="" transfer="" ultra-high="" update="" using="" with="" within="" x-ray="" xfel="" xlink:href="12-20240383_M3.png" xmlns:xlink="http://www.w3.org/1999/xlink" {\mathrm{e}}="" μm="" μm<sup<–1 Acta Physica Sinica. 2024 73(12): 120701. Published 2024-06-20</sub<3<>
physics, multidisciplinary