Abstract:For reliable and practical application of structural health monitoring approaches in conjunction with dense sensor arrays deployed on 'smart' systems, there is a need to develop and evaluate alternate strategies for efficient problem decomposition to rapidly and accurately determine the occurrence, location and level of small changes in the underlying structural characteristics of a monitored system based on its vibrational signature. Furthermore, there is also a need to quantify the level of uncertainties in the identified system characteristics so as to have a measurable level of confidence in the parameters to be relied on for the detection of genuine changes (damage) in the monitored system. This study presents the results of two time-domain identification techniques applied to a full-scale 17-story building, based on ambient vibration measurements. The Factor building is a steel frame structure located on the UCLA campus. This building was instrumented permanently with a dense array of 72-channel accelerometers, and the acceleration data are being continuously recorded. The first identification method used in this study is the NExT/ERA, which is regarded as a global (or centralized) approach, since it deals with the global dynamic properties of the structure. The second method is a time-domain identification technique for chain-like MDOF systems. Since in this method the identification of each link of the chain is performed independently, it is regarded as a local (or decentralized) identification methodology. For the same reason, this method can be easily adopted for large-scale sensor network architectures in which the centralized approaches are not feasible due to massive storage, power, bandwidth and computational requirements. To have a statistically meaningful results, 50 days of recorded data are considered in this study. The modal parameter and chain identification procedures are performed over time windows of 2 h each and with 50% overlap. Using the NExT/ERA method, 12 dominant modes of the building were identified. It was observed that variations in the frequency estimation are relatively small; the coefficient of variation is about 1–2% for most of the estimated modal frequencies. Chain system identification was successfully implemented using the output-only data acquired from the Factor building. Probability distributions of the estimated coefficients of displacement and velocity terms in the interstory restoring functions (which are the mass-normalized local stiffness and damping values) that were found based on the chain system identification are presented. The variability of the estimated parameters due to temperature fluctuations is investigated. It is shown that there is a strong correlation between the modal frequency variations and the temperature variations in a 24 h period.

Advanced Signal Processing For Structural Identification: Experimental Studies

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

Time-varying modal identification of structures under seismic excitations using a novel time-frequency method

A novel approach for the structural identification and monitoring of a full-scale 17-story building based on ambient vibration measurements

System identification of a full‐scale five‐story reinforced concrete building tested on the NEES‐UCSD shake table

Model-free Identification of Multiple Periodic Excitations and Detection of Structural Anomaly Using Noisy Response Measurements

Modal Identification of a 5-Story RC Building Tested on the NEES-UCSD Shake Table

Experimental Study of Structural Damage Based on Bispectral Analysis and Singular Value Decomposition

Fast Stochastic Subspace Identification of Densely Instrumented Bridges Using Randomized SVD

Development of Recursive Subspace Identification for Real-Time Structural Health Monitoring under Seismic Loading

Detection of Structural Damage in a Shaking Table Test Based on an Auto-Regressive Model with Additive Noise

Enhanced Measurements of Structural Inter-Story Drift Responses in Shaking Table Tests

Identification of Structural Dynamic Characteristics Based on Machine Vision Technology

Synchro-Squeezed Adaptive Wavelet Transform-Based Optimized Multiple Analytical Mode Decomposition: Parameter Identification of Cable-Stayed Bridge under Earthquake Input

NeuralSI: Structural Parameter Identification in Nonlinear Dynamical Systems

High-Speed Videogrammetry for Seismic Performance of the Spherical Reticulated Shell Structure on the Shaking Table

Seismic Damage Detection of A Full-Scale Shaking Table Test Structure

Output-only modal analysis for non-synchronous data using stochastic sub-space identification

Robust and efficient feature-based method for structural health monitoring of large structures

Study of Stochastic Subspace System Identification Method

Data‐Driven Structural Health Monitoring on Shaking Table Tests of a 3‐Story Steel Building with Sliding Slabs