Abstract:A long-term structural health monitoring (SHM) system using wireless smart sensor networks (WSSNs) for civil infrastructure such as a cable-stayed bridge is investigated. The hardware and software for the SHM system and its components have been developed for low-cost, efficient, and autonomous monitoring of the bridge. A total of 70 sensor nodes and two base station computers have been deployed to assess the integrity of a bridge using an autonomous SHM application with consideration of harsh outdoor environments. The 2nd Jindo Bridge located in Korea is considered as a test bed structure, which is an in-service cable-stayed bridge with the total length of 484 m (i.e., a 344-m main span and two 70-m side spans). In addition, the power supply problem, which is one of the critical issues to be solved for continuously operating the long-term SHM system, is addressed. To this end, two types of approaches have been introduced, which are effective power management strategies and energy harvesting techniques using solar cells and complementary small-size wind turbine generators, respectively. Introduction Civil infrastructure is widespread and it has great impact on the quality of our daily lives. Monitoring the safety and functionality of the civil infrastructure such as the world’s buildings and bridges is critical to minimize the cost associated with repair and ultimately improving public safety. Structural health monitoring (SHM) plays an important role for capturing structural response as well as assessing structural condition. However, the high cost associated with installation and maintenance is still being a limitation of wide spread adoption of SHM system. With the rapid advancement in electronics, smart wireless sensor system which have capabilities of on-board computation and wireless data transmission has emerged as a powerful alternative to existing SHM system by substituting expensive accelerometers with low-cost digital sensors and long cables with wireless transmission. This novel system enables a dense deployment of sensor so that it will provide more accurate information of a large infrastructure. To validate smart wireless system as a long-term SHM system, the 2nd Jindo cable-stayed bridge was selected as a test bed. The test bed bridge has a 344-m main span and two 70-m side spans, connecting mainland South Korea with Jindo Island across the sea. The Crossbow’s Imote2s are utilized in

Reconfigurable Wireless Monitoring Systems for Bridges: Validation on the Yeondae Bridge

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Implementation of Wireless Monitoring Systems for Modal Analysis of Bridges along a Korean Test Road

Validation of a large-scale wireless structural monitoring system on the Geumdang Bridge

Performance Monitoring of the Geumdang Bridge Using A Dense Network of High-Resolution Wireless Sensors

Autonomous structural health monitoring using wireless smart sensors on a cable-stayed bridge

Wireless Sensing Technologies for Bridge Monitoring and Assessment

Statistical Analysis of Modal Properties of a Cable-Stayed Bridge through Long-Term Wireless Structural Health Monitoring

System Identification of a Cable-Stayed Bridge Using Vibration Responses Measured by a Wireless Sensor Network

Hybrid Wireless Smart Sensor Network for Full-Scale Structural Health Monitoring of A Cable-Stayed Bridge

Long-term structural health monitoring system of a cable-stayed bridge based on wireless smart sensor networks and energy harvesting techniques

Structural Health Monitoring of a Cable-Stayed Bridge Using Smart Sensor Technology: Deployment and Evaluation

A Wireless Data Acquisition System Based on MEMS Accelerometers for Operational Modal Analysis of Bridges

Long-Range Low-Power Multi-Hop Wireless Sensor Network for Monitoring the Vibration Response of Long-Span Bridges

Multi-channel fiber optical sensing system for urban bridge cluster health monitoring

A new method for bridge structural health monitoring based on wireless sensor networks

Development of Structural Health Monitoring Systems for Railroad Bridge Testbeds

Vibration Monitoring Using Wireless Sensor Networks on Dongying Huanghe River Bridge

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Campaign Monitoring of Railroad Bridges in High-Speed Rail Shared Corridors using Wireless Smart Sensors

Railroad bridge monitoring using wireless smart sensors