Abstract:Background, aim, and scopeIonic liquids are regarded as essentially “green” chemicals because of their insignificant vapor pressure and, hence, are a good alternative to the emissions of toxic conventional volatile solvents. Not only because of their attractive industrial applications, but also due to their very high stability, ionic liquids could soon become persistent contaminants of technological wastewaters and, moreover, break through into natural waters following classical treatment systems. The removal of harmful organic pollutants has forced the development of new methodologies known as advanced oxidation processes (AOPs). Among them, the Fenton and Fenton-like reactions are usually modified by the use of a higher hydrogen peroxide concentration and through different catalysts. The aim of this study was to assess the effect of hydrogen peroxide concentration on degradation rates in a Fenton-like system of alkylimidazolium ionic liquids with alkyl chains of varying length and 3-methyl-N-butylpyridinium chloride.Materials and methodsThe ionic liquids were oxidized in dilute aqueous solution in the presence of two different concentrations of hydrogen peroxide. All reactions were performed in the dark to prevent photoreduction of Fe(III). The concentrations of ionic liquids during the process were monitored with high-performance liquid chromatography. Preliminary degradation pathways were studied with the aid of 1H NMR.ResultsDegradation of ionic liquids in this system was quite effective. Increasing the H2O2 concentration from 100 to 400 mM improved ionic liquid degradation from 57–84% to 87–100% after 60 min reaction time. Resistance to degradation was weaker, the shorter the alkyl chain.DiscussionThe compound omimCl was more resistant to oxidation then other compounds, which suggests that the oxidation rates of imidazolium ionic liquids by OH· are structure-dependent and are correlated with the n-alkyl chain length substituted at the N-1-position. The level of degradation was dependent on the type of head group. Replacing the imidazolium head group with pyridinium increased resistance to degradation. Nonetheless, lengthening the alkyl chain from four to eight carbons lowered the rate of ionic liquid degradation to a greater extent than changing the head group from imidazolium to pyridinium. 1H-NMR spectra show, in the first stage of degradation, that it is likely that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack.ConclusionsThe proposed method has proven to be an efficient and reliable method for the degradation of imidazolium ionic liquids by a Fenton-like reagent deteriorated with lengthening n-alkyl substituents and by replacing the imidazolium head group with pyridinium. The enhanced resistance of 1-butyl-3-methylpyridinium chloride when the resistance of imidazolium ionic liquids decreases with increasing H2O2 concentration is probably indicative of a change in the degradation mechanism in a vigorous Fenton-like system. H-NMR spectra showed, in the first stage of degradation, that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack.Recommendations and perspectivesSince ionic liquids are now one of the most promising alternative chemicals of the future, the degradation and waste management studies should be integrated into a general development research of these chemicals. In the case of imidazolium and pyridinium ionic liquids that are known to be resistant to bio- or thermal degradation, studies in the field of AOPs should assist the future structural design as well as tailor the technological process of these chemicals

Degradation of polylactide using basic ionic liquid imidazolium acetates

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Microwave-Assisted Degradation of Lignin Model Compounds in Imidazolium-Based Ionic Liquids

Thermal Degradation Mechanism of Bio-based Polybutylactam Plasticized by Ionic Liquids

Effect of Grafted Imidazolium Cations on Crystallization Behavior of Polylactide

Effect of Amino Acid Ionic Liquids on the Interfacial Structure and Degradation Behavior of PLA/PBAT Blends

Highly Efficient Flame Retardant Poly(lactic Acid) Using Imidazole Phosphate Poly(ionic Liquid)

Degradation of Imidazolium-Based Ionic Liquids in Aqueous Solution Using Plasma Electrolysis

Mechanistic insight into the roles of anions and cations in the degradation of poly(ethylene terephthalate) catalyzed by ionic liquids

Biodegradability of imidazolium and pyridinium ionic liquids by an activated sludge microbial community

Hydrogen Bond Promoted Thermal Stability Enhancement of Acetate Based Ionic Liquid

Direct Polycondensation of L-Lactic Acid in Hydrophobic Bis(trifluoromethanesulfonyl)imide-Anionic Ionic Liquids: A Kinetic Study

Ultrasonic Chemical Oxidative Degradations of 1,3-Dialkylimidazolium Ionic Liquids and Their Mechanistic Elucidations.

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Enhancing the properties of PBAT/PLA composites with novel phosphorus-based ionic liquid compatibilizers

Theoretical Investigation of the Mechanism for the Degradation of Cellulose Promoted by Imidazolium-Based Acidic Ionic Liquids

Accelerated hydrolytic degradation of poly(l-lactide) by blending with poly(ether-block-amide)

Degradation Behaviors and Crystallization of Rapidly Degradable Polylactic Acid Prepared by Melting Through Coordination Complexation Reaction

The effect of alkyl chain length on the degradation of alkylimidazolium- and pyridinium-type ionic liquids in a Fenton-like system

Ionic liquid functionalized polylactides: the effect of anions on catalytic activity and carbon nanotube dispersion

Solubilization and Upgrading of High Polyethylene Terephthalate Loadings in a Low-Costing Bifunctional Ionic Liquid.