Abstract:The optical efficiency of the solar receiver is important to the global efficiency of the solar power tower plant. However, the present commercial cylindrical receiver causes a considerable optical loss because most of the sunrays reflected by the receiver surface are lost to the environment. To improve optical efficiency, three novel receivers with vertical finned structures and two novel receivers with horizontal finned structures are proposed in this paper. The optimal configurations of these receivers are obtained after parametric optimization. The optical efficiency and solar fluxes distributions of the optimal novel receivers are compared with those of the traditional cylindrical receiver at the noon of spring equinox. The results show that there is an optimal fin number of 6 for all the receivers with vertical finned structures. The receiver with vertical finned structures and the flat bottom shows the maximal optical efficiency of 63.9%. It indicates an improvement of 3.2 percentage points compared with that of the traditional cylindrical receiver. The receiver with horizontal fins with flat bottom shows the minimal optical efficiency of 60.3% at the noon of the spring equinox. It indicates a decrease of 0.4 percentage points compared with that of the traditional cylindrical receiver. Additionally, the peak solar fluxes on the novel receivers are quite close to each other and are nearly double that of the traditional cylindrical receiver. In the end, a multi-point aiming strategy is applied to the optimal novel receivers, and the results show that the peak fluxes can be obviously reduced. It is concluded that optical efficiency can be effectively improved by using the receivers with vertical finned structures.

Distribution of Energy Density and Optimization on the Surface of the Receiver for Parabolic Trough Solar Concentrator

Spectral-spatial Design and Coupling Analysis of the Parabolic Trough Receiver

Optical performance investigation on flat receiver for parabolic trough solar collector based on the MCRT method

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Prediction and Optimization of the Performance of Parabolic Solar Dish Concentrator with Sphere Receiver Using Analytical Function

Optical analysis and optimization of parabolic dish solar concentrator with a cavity receiver

Radiation Performance of Dish Solar Concentrator/Cavity Receiver Systems

Optical Modeling for A Two-Stage Parabolic Trough Concentrating Photovoltaic/Thermal System Using Spectral Beam Splitting Technology

Energetic and Exergetic Analyses on Structural Optimized Parabolic Trough Solar Receivers in a Concentrated Solar–thermal Collector System

Performance Simulation of a Parabolic Trough Solar Collector

Design and Optimization of Elliptical Cavity Tube Receivers in the Parabolic Trough Solar Collector

Structural Optimization Design And Radiation Performance Simulation In A Dish Solar Collector System

Optimization of solar receivers for high-temperature solar conversion processes: Direct vs. Indirect illumination designs

Design and Optical Performance Evaluation of the Three-Dimensional Solar Concentrators with Multiple Compound Parabolic Profiles and Elliptical and Rectangular Receiver Shapes

Numerical Study of New-Type Receiver with Axially-Hollow Spiral Deflector for Parabolic Trough Direct-Steam-Generation Loop of Concentrating Solar Power System

Temperature-based Optical Design, Optimization and Economics of Solar Polar-Field Central Receiver Systems with an Optional Compound Parabolic Concentrator

Finite-Element Analysis for Flux Distribution on Focal Plane of Rotating Parabolic Concentrators

Optical Efficiency Improvement of Solar Power Tower by Employing and Optimizing Novel Fin-Like Receivers

Performance Study and Comparative Analysis of Traditional and Double-Selective-coated Parabolic Trough Receivers

A New Concept to Form Arc Cylinders to Parabolic Troughs Using Optimal Forces