Abstract:Ni–Cu under-bump metallisation (UBM) can reduce stress and improve wetting ability in technology for electronic packaging technology advances with three-dimensional integrated circuit (3D IC) devices. The bond between the Sn-based solder and Ni–Cu UBM is affected by the formation of intermetallic compounds (IMCs), specifically Ni3Sn4 and (Ni,Cu)3Sn4. This paper investigates the mechanical properties of IMCs, which are critical in assessing the longevity of solder joints. First-principles calculations were carried out to investigate the phase stability, mechanical properties and electronic structures of Ni3Sn4, Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 IMCs. The calculated formation enthalpies show that the doping of Cu atoms leads to a decrease in the stability of the phases and a reduction in the mechanical properties of the Ni3Sn4 crystal structure. As the concentration of Cu atoms in the Ni3Sn4 cells increases, the bulk modulus values of (Ni,Cu)3Sn4 formed with different compositions decrease from 107.78 GPa to 87.84 GPa, the shear modulus decreases from 56.64 GPa to 45.08 GPa, and the elastic modulus decreases from 144.59 GPa to 115.48 GPa, indicating that the doping of Cu atoms into the Ni3Sn4 cells may adversely affect their mechanical properties and increase the possibility of microcracking at the interface during actual service. The anisotropy of (Ni,Cu)3Sn4 is more significant than that of Ni3Sn4, with Ni2.0Cu1.0Sn4 showing the highest anisotropy. After evaluating the electronic structures, the metallic properties of Ni3Sn4 and the Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 phases are revealed by electronic structure analysis. The total density of states (TDOS) for (Ni,Cu)3Sn4 structures is mainly influenced by Ni-d and Cu-d states. The addition of Cu atoms can increase the brittleness of Ni3Sn4. In addition, the region where d and p hybridisation occurs gradually increases with increasing Cu content. The electronic properties suggest that the binding energy between Ni and Sn atoms weakens with the addition of Cu atoms, resulting in a decrease in the elastic modulus. This research can serve as a valuable reference and theoretical guide for future applications of these materials.

Calculation of Electronic Structure and Mechanical Properties of DO3–Fe75-xSi25Nix Intermetallic Compounds by First Principles

Effect of Alloying Elements on Lattice Misfit and Elasticities of Ni-based Single Crystal Superalloys by First-Principle Calculations

First Principles Studies on the Elastic, Thermodynamic Properties and Electronic Structure of Ti15−xMoxSn Compounds

Investigation on the lattice vibration, mechanical properties, stress-strain behavior and electronic properties of FeTiSi, CoTiSi and NiTiSi intermetallics from a first-principles calculations

Substitution behavior of Cu doped into Fe 3 Si and its effect on the electronic structure and mechanical properties based on first-principles calculation

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Investigation on the electronic structures, elastic and thermodynamic properties of TiNi, Ti 2 Ni and TiNi 3 intermetallic compound

First-Principles Calculations of Structural and Mechanical Properties of Cu–Ni Alloys

First-principles studies of Al–Ni intermetallic compounds

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys

Theoretical Calculations of the Ideal Strength of Ni, NiAl and Ni3Al in Tension and Shear

First-Principles Calculations of the Elastic Properties of the Nickel-Based L12 Intermetallics

First-principle calculation on mechanical and thermal properties of B2-NiSc with point defects

First‐Principles Study on Electronic and Elastic Properties of Co, Ni, Cu, and Mo‐Doped Β‐Si3N4

First-principles studies of effects of interstitial boron and carbon on the structural, elastic, and electronic properties of Ni solution and Ni3Al intermetallics*

Structural and magnetic properties of Fe73.5Cu1Nb3−xTixSi13.5B9 (x≤3) alloys

First-Principles Study of Cu Addition on Mechanical Properties of Ni3Sn4-Based Intermetallic Compounds

The Alloying Strategy to Tailor the Mechanical Properties of θ-Al13Fe4 Phase in Al-Mg-Fe Alloy by First-Principles Calculations

The structural, mechanical and electronic properties of NbXSi (X=Fe, Co, Ni, Ru, Rh, Pd, Os, Ir and Pt) compounds from first-principles calculations

First-principle and molecular dynamics calculations for physical properties of Ni–Sn alloy system

Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations