Abstract:It has been widely considered that the global warming was induced by the increasing atmospheric concentrations of carbon dioxide, which has a significant impact on the sustainable development of the human society. Injecting carbon dioxide into depleted oil / gas reservoir has been developed to reduce carbon dioxide emission by the sequestration of CO2 underground, which is also considered as one promising approach to enhance oil recovery simultaneously. The evaluating of CO2 sequestration in oil reservoir needs highly accurate experimental data and models about the thermodynamic characters of CO2 + oil mixture. Density is one of key physical characters for simulating the diffusion and migration of carbon dioxide under the oil / gas reservoir. Research on volumetric behaviour is helpful to understand the expansion of the liquid phases in CO2 + oil mixture.In this paper, decane is investigated instead of petroleum because of the similar thermal physical property. The measurements have been performed at pressures from 12 MPa to 18 MPa and temperatures from 313.15 K to 343.15 K at four compositions x(1) (x(1) is the mole fraction of carbon dioxide) = 0.8690, 0.9135, 0.9430 and 0.9818 by a magnetic suspension balance (MSB). The accuracy of the experimental quantities presented in this work are T / K = +/- 0.01, m / g = +/- 10(-5) respectively. One circulation pump (AKICO, Japan) is equipped to accelerate the dissolution of CO2 in decane. Some conclusions can be obtained from the experiment as follow: (1) the dissolution of CO2 increases the density of decane, the density of CO2 + decane solution increases with increasing pressure and decreases with increasing temperature. (2) the slope of density with respect to pressure increases with increasing CO2 mole fractions while the slope with respect to temperature decreases with increasing CO2 mole fractions. (3) the crossover phenomenon appears at different compositions and the crossover pressure increases with temperature. (4) the excess molar volumes of this binary mixture are negative and show negative increasing with temperature for the data reported in this work. The GERG - 2008 model is used to predict density of CO2 + decane solution, which takes temperature, pressure, and CO2 concentration into account. An empirical equation is also used to predict the density of this binary mixture. The predictions show that the empirical equation is in good agreement with the experimental data over the experimental range. The measurement and the model used in this work supplies the basic experimental data and theoretical analysis to CO2 sequestration and enhance oil recovery. (C) 2013 The Authors. Published by Elsevier Ltd.

Density Behavior of CO2 + Decane Mixtures by Modified SAFT Equation of State

(P, Ρ, T) Behavior of CO2 + Tetradecane Systems: Experiments and Thermodynamic Modeling

Densities and Excess Volumes of CO2 + Decane Solution from 12 to 18mpa and 313.15 to 343.15K

Density Measurement and PC-SAFT/tPC-PSAFT Modeling of the CO2 + H2O System over a Wide Temperature Range

Densities Of The Binary System Of Carbon Dioxide And Dodecane From (313 To 353) K And Pressures Up To 18 Mpa

Measurement and Modeling of the Densities for Co2 + Dodecane System from 313.55 K to 353.55 K and Pressures Up to 18 Mpa

Densities and Volumetric Characteristics of Binary System of CO2 + Decane from (303.15 to 353.15) K and Pressures Up to 19 MPa

Evaluation of volume translation models in PC-SAFT EoS for carbon dioxide

Comparison of predictions of the PC-SAFT equation of state and molecular simulations for the metastable region of binary mixtures

Prediction of the CH4-CO2 mixture properties using SAFT-VR Mie equation of state and molecular dynamics simulations

High-Pressure Carbon Dioxide Solubility in a Deep Eutectic Solvent (Choline Chloride/MDEA) + Sulfolane - Experimental Study and Thermodynamic Modeling Using PC-SAFT Equation of State

Accurate experimental ($p$, $ρ$, $T$) data of the ($CO_{2}$ + $O_{2}$) binary system for the development of models for CCS processes

Toward accurate density and interfacial tension modeling for carbon dioxide/water mixtures

Simulation of multiphase behavior in supercritical CO2–heavy oil–water sludge extraction systems using cubic-plus-association equation of state

Density and Volumetric Properties of Binary Mixtures of CO2 + Hexadecane from (303.2 to 473.2) K and Pressures Up to 50.0 MPa

A generalized equation of state for associating fluids in nanopores: Application to CO2-H2O, CH4-H2O, CO2-CH4, and CO2-CH4-H2O systems and implication for extracting dissolved CH4 by CO2 injection

Assessing the Feasibility of Deep Eutectic Solvents For CO2 Capture From Molecular And Process Modeling

Equation Of State Saft-Cp For Vapour-Liquid Equilibria And Mutual Solubility Of Carbon Dioxide And Water

Volume translation Soave-Redlich-Kwong equation of state for binary mixtures of R1234yf+CO2 and R1234ze (E)+CO2

Simultaneous measurement of the density and viscosity for n-Decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa

Study of density properties of supercritical CO2-decane solution using magnetic suspension balance