Abstract:For 4D Flow MRI of mean and turbulent flow a compromise between spatiotemporal undersampling and velocity encodings needs to be found. Assuming a fixed scan time budget, the impact of trading off spatiotemporal undersampling versus velocity encodings on quantification of velocity and turbulence for aortic 4D Flow MRI was investigated. For this purpose, patient-specific mean and turbulent aortic flow data were generated using computational fluid dynamics which were embedded into the patient-specific background image data to generate synthetic MRI data with corresponding ground truth flow. Cardiac and respiratory motion were included. Using the synthetic MRI data as input, 4D Flow MRI was subsequently simulated with undersampling along pseudo-spiral Golden angle Cartesian trajectories for various velocity encoding schemes. Data were reconstructed using a locally low rank approach to obtain mean and turbulent flow fields to be compared to ground truth. Results show that, for a 15-min scan, velocity magnitudes can be reconstructed with good accuracy relatively independent of the velocity encoding scheme ( S S I M U = 0.938 ± 0.003 ) , good accuracy ( S S I M U ≥ 0.933 ) and with peak velocity errors limited to 10%. Turbulence maps on the other hand suffer from both lower reconstruction quality ( S S I M TKE ≥ 0.323 ) and larger sensitivity to undersampling, motion and velocity encoding strengths ( S S I M TKE = 0.570 ± 0.110 ) when compared to velocity maps. The best compromise to measure unwrapped velocity maps and turbulent kinetic energy given a fixed 15-min scan budget was found to be a 7-point multi- V enc acquisition with a low V enc tuned for best sensitivity to the range of expected intra-voxel standard deviations and a high V enc larger than the expected peak velocity.

Temperature and Velocity Map Measurement Using MRI

A spiral-based volumetric acquisition for MR temperature imaging.

Accelerated MR thermometry using the Kalman filter

Mapping Water Temperature in a Reservoir with Three-dimensional Grid Inversion

STUDY ON TEMPERATURE MEASUREMENT IN WATER-SATURATED POROUS MEDIA USING MRI

A Velocity Decomposition-Based 3D Optical Flow Method for Accurate Tomo-PIV Measurement

Measurement of Fluid Flow in Pipe and Porous Media by High-Resolution Magnetic Resonance Imaging

Quantitative study of density-driven convection mass transfer in porous media by MRI

Visualization and Measurement of CO2 Flooding in Porous Media Using MRI

Testing oil saturation distribution in migration paths using MRI

MRI measurements of CO2 hydrate dissociation rate in a porous medium

MRI investigation of water–oil two phase flow in straight capillary, bifurcate channel and monolayered glass bead pack

An In-Situ MRI Method for Quantifying Temperature Changes During Crystal Hydrate Growths in Porous Medium

MRI 3D tissue temperature distribution measurement

In Vivo Blood Flow Visualization with Magnetic Resonance Imaging

Optimizing encoding strategies for 4D Flow MRI of mean and turbulent flow

Highly sensitive and high throughput magnetic resonance thermometry using superparamagnetic nanoparticles

Simultaneous 2D Temperature and Velocity Measurement Using a One-Color-camera PLIF Method Combined with a Physically Constrained Temperature Tagging Method.

Multiphase Flow Regime Characterization and Liquid Flow Measurement Using Low-Field Magnetic Resonance Imaging

[Real-Time and Non-Invasive Temperature Monitoring of Thermotherapy Using MRI].

Magnetic Resonance Imaging and Velocity Mapping in Chemical Engineering Applications