Abstract:The susceptibility of masonry walls to out-of-plane failure under seismic loading presents a significant engineering concern. In adherence to contemporary limit state design philosophy and as mandated by performance-based design guidelines, it is crucial to accurately estimate statistics parameters such as the mean and variance of out-of-plane resistance. To achieve this, two deterministic models are often considered within the Monte Carlo simulation framework: design-code models, known for their computational efficiency but potential for significant model error, and mechanics-based finite element models, noted for their accuracy but computational intensity. Relying solely on either model for statistics estimation presents challenges due to their respective inherent limitations. This study introduces an improved strategy that synergizes the strengths of both models, resulting in enhanced statistics estimators for the out-of-plane resistance of masonry walls. The proposed methodology involves the use of the control variate method by integrating numerous design-code model evaluations to boost computational efficiency while incorporating a limited number of finite element model evaluations to ensure accuracy. The constructions of the proposed estimators follow rigorous optimization procedures to minimize associated errors and variances. Theoretical derivations are provided for essential elements in the estimator constructions, such as model evaluation numbers for finite element and design-code models and control variate coefficients. Moreover, the accuracy of the proposed estimators is compared with that of the crude Monte Carlo estimator. A key benefit of the proposed estimators is their unbiased nature, and their accuracy is not compromised by the discrepancies between the finite element model and the design-code model. To demonstrate the practicality of these estimators, two case studies are illustrated: one focusing on unreinforced masonry walls and the other on reinforced masonry walls. The results indicate that design-code model-based estimators exhibit large bias, and compared to the estimators that solely rely on the finite element model, the proposed estimators achieve higher accuracy given the same computational budget.

Method for Predicting the Failure Load of Masonry Wall Panels Based on Generalized Strain-Energy Density

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

SVM Models for Predicting Failure Load of Masonry Wall Panel under Lateral Load

The Hysteretic Failure Features of Reinforced Masonry Shear Walls Revealed by Modeling Experimental Residual Strain Data

Innovative ANN technique for predicting failure/cracking load of masonry wall panel under lateral load

Cellular Automata Method for Mapping Failure Patterns of Masonry Wall Panels with Openings

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

An Experimental Strain-Based Study on the Working State of Husk Mortar Wallboards with Openings

An improved method for statistics estimation of out-of-plane load resistance of masonry walls using design-code models and mechanics-based finite element models

Essential Stressing State Features of Laterally Loaded Masonry Wall Panels Revealed from Experimental Displacements

Mechanical Performance of Prefabricated External Wall Panel under Horizontal Displacement

Analytical Model for the In-Plane Lateral Capacity of Unreinforced Masonry Walls Based on Effective Compression Zone Failure Mechanism

Theoretical Method for Predicting the Failure Mode of Reinforced Concrete Shear Walls Subjected to Axial Tension and Cyclic Lateral Loads

The Application of Stiffness Corrector in Predicting the Behavior of Vertically Loaded Masonry Wall Panels

STUDY ON FAILURE MODE OF HUSK MORTAR ENERGY-SAVING WALLBOARDS

Analytical modeling of masonry load-bearing walls

Finite element-based reliability analysis of reinforced concrete masonry walls under eccentric axial loading considering slenderness effects

Research on Normalized Stiffness Degradation of Reinforced-Block Masonry Shear Walls

Analysis of Influencing Factors on the Skeleton Curve for Fully Grouted Reinforced Concrete Masonry Shear Walls

Predicting the lateral performance of a new type of Midply shear wall system: An efficient methodology