Abstract:Abstract Strain localization simulation of overconsolidated soils with high overconsolidation ratio (OCR) has been a long‐standing challenge. Some critical state soil models, including the modified Cam‐clay (MCC) model, have been widely applied, but they may not predict the shear dilatancy of overconsolidated soils well in some cases. Hence, the unified hardening (UH) model, which may be viewed as a generalized version of the MCC model, is implemented. It has been recognized, nonetheless, that without resorting to the regularization mechanism, the standard finite element method (FEM) or the second‐order cone programming optimized finite element method (FEM‐SOCP) often experiences instability or interruption of calculating the hardening‐softening responses of overconsolidated soils. To resolve the aforementioned difficulty, the UH model is developed and implemented in the framework of FEM‐SOCP based on the micropolar continuum (mpcFEM‐SOCP) to predict strain localizations of overconsolidated soils. Furthermore, to obviate non‐convexity of mpcFEM‐SOCP induced by material softening, an effective composite update scheme of hardening variable p c , which refers to the implicit variable (IV) scheme for the hardening stage and then refers to the explicit variable (EV) scheme for the softening stage, is proposed. Based on one biaxial compression problem and one rigid strip footing problem, numerical analyses disclose that by applying mpcFEM‐SOCP in conjunction with the composite update scheme of p c , the UH model of micropolar continuum can effectively predict the strain localization behavior of overconsolidated soil during its failure stage, and the stable hardening‐softening responses of overconsolidated soils can be readily attained.

Extended UH Model: Three-Dimensional Unified Hardening Model for Anisotropic Clays

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

Thermodynamics-based bounding surface model for overconsolidated clay

Unified hardening (UH) model for clays and sands

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

Modified Duncan-Chang Model Considering Physical Properties of Saturated Clays

Loading–unloading judgement for advanced plastic UH model

An Egg-Shaped Elastic Viscoplastic Model for Clay: Experimental Investigation and Constitutive Modelling

A MODIFIED HARDENING SOIL MODEL CONSIDERING NONLINEAR DEGRADATION OF STIFFNESS

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Limit equilibrium analysis of anisotropic soft clay stability against excavation basal heave

Modeling Strain-Rate Dependent Behavior of KR0-Consolidated Soft Clays

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

Modeling Temperature-Dependent Behavior of Soft Clay

Stability Analysis of Overconsolidated Unsaturated Red Clay Slope Based on Modified UH Model

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

A Coupled Elastoplastic Damage Model for Clayey Rock and Its Numerical Implementation and Validation

Geotechnical analysis involving strain localization of overconsolidated soils based on unified hardening model with hardening variable updated by a composite scheme

An anisotropic hypoplastic model for clays considering the non-coaxial behavior