Abstract:YBCO bulks with submicron Y2BaCuO5 particles have been prepared under oxygen partial pressures of 0.21atm and 1atm, respectively, by the powder melting process (PMP). The microstructures, oxygen contents and critical current densities of the samples have been investigated. The results showed that the sample grown under P(O2) = 1 atm contained Y2BaCuO5 particles with a little bigger average size and had a slightly higher density of stacking faults than the one prepared under P(O2) = 0.21 atm. Oxygen content measurements indicated that the as-grown sample under P(O2) = 1 atm had a higher oxygen content. After post-annealing in flowing oxygen, the oxygen content of the P(O2) = 1 atm sample was still higher than that of the P(O2) = 0.21 atm sample. They were examined to be 6.94 and 6.88 with X-ray diffraction for the two oxygenated samples, respectively. Magnetization measurements have been performed on the two types of oxygenated samples and critical current densities (Jc) have been calculated based on the extended Bean critical state model. The P(O2) = 0.21 atm sample exhibits Jc values of 5.47×105 A/cm2 and 2.22×104 A/cm2 in 1 T magnetic field at 20K and 77K, respectively. The P(O2) = 1 atm sample, meanwhile, has Jc values of 9.46×105 A/cm2 and 1.47×104 A/cm2 in 1 T magnetic field at 20K and 77K, respectively. Moreover, at 20K, the Jc of the P(O2) = 1 atm sample is higher than that of the P(O2) = 0.21 atm sample in an applied magnetic field up to 5 T. At 77K, however, the Jc of the P(O2) = 1 atm sample drops more quickly than that of the P(O2) = 0.21 atm sample. The mechanisms of the different microstructures, oxygen contents and magnetic field dependence behaviors of Jc for the two kinds of samples have been discussed.

The Properties of YBCO Superconductors Prepared by a New Approach: the 'powder Melting Process'

Preparation of enhanced Jc YBCO bulks by powder melting process with a combination of submicron 211 precursor and Pt addition

Study On The Technology And Property For Y2bacuo5 Particles Artificial Doping To Obtain Single-Crystal Domain Melt-Textured Ybco Bulk Superconductor

Property Improvement of 600-Nm-thick YBCO Superconducting Films Fabricated Using a Pb-Modified MOD Method

Low-cost YBCO coated conductor technology

In-Plane and Out-of-Plane Anisotropy in the Optical and Dielectric Properties of Yba2cu3o7-X Superconducting Film

Influence of Partial Melting Temperature on Structure and Superconducting Properties of YBCO Film by Non-fluorine MOD

Preparation of YBCO superconducting thick films On MgO substrates by modified melt growth process

Efficient Fabrication of Ultralight YBa 2 Cu 3 O 7− x Superconductors with Programmable Shape and Structure

Enhanced performance of GdBCO bulk superconductors by doping a new kind of YGdBa4CuNbOy nanoparticles

Superconducting properties of YBCO bulk co-embedded by nano-BaTiO3 and WO3 particles

STUDY OF THE PREPARATION OF HIGH Tc SUPERCONDUCTING YBCO THIN FILMS BY A PLASMA-ASSISTED MOCVD PROCESS

Effect of Doping on Phase Formation in YBCO Composites

Influence of Oxygen Partial Pressure on the Microstructures and Critical Current Densities of PMP-Processed YBCO Bulks with Submicron Y2BaCuO5 Particles

MAGNETIC PROPERTIES OF A YBCO CRYSTAL PREPARED BY MELT-TEXTURED GROWTH METHOD

Soldering of MT-YBCO: method to produce superconductive junctions

Lightweight, highly tough and durable YBa2Cu3O7 -x superconductor

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Growth and properties of superconducting YBCO single crystals

A practical processing method for fabrication of single-domain YBCO superconductors using large-sized GdBCO seed crystals

A new RE + 011 TSIG method for the fabrication of high quality and large size single domain YBCO bulk superconductors