Abstract:Industrial robots are characterized by good flexibility and a large working space, and offer a new approach for the machining of large and complex parts with small machining allowances (extra material allowed for subsequent machining). Parts of this type (such as aircraft skin parts, wind turbine blades, etc.) are easily deformed due to their large scale and low stiffness. Therefore, these parts cannot be directly machined according to the designed model. A feasible method is to plan a robotic machining path by using the point clouds of parts after clamping from onsite measurement which contains inherent defects of measurement such as noise points and abrupt points. In this article, a novel method is proposed to plan and optimize a robotic machining path that meets the requirements of smoothness, dexterity, and stiffness based on the point cloud from onsite measurement. The dual nonuniform rational B-spline curves of the machining path points and tool axis points are generated at first. Next, an objective function of smoothness optimization is established to filter out the local mutation of the path by considering the constraints of both the deformation energy and the deviation. Then, the objective function of robot postures optimization is established to optimize dexterity and Cartesian stiffness of a robot during the machining process. To show the feasibility of the proposed method, simulation and experiments are carried out. It is proved that the proposed method can generate a smooth machining trajectory. The stability of joint rotation and the rigidity and dexterity of the robot are improved during the machining process.

Nanoscale Trajectory Planning with Flexible Acc/Dec and Look-Ahead Method

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Research on Cubic Polynomial Acceleration and Deceleration Control Model for High Speed NC Machining

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Acceleration/deceleration control of CNC systems and velocity layout of end points in machining segments

Research on a New S-curve Acceleration and Deceleration Control Method

Research on Accelerating and Decelerating Control of NC System

Driving Force Constraint Corner Smoothing Method For Highspeed Machine Tools

A Real-time Look-ahead Trajectory Planning Methodology for Multi Small Line Segments Path

New look-ahead algorithm for velocity control in high speed machining

Velocity Planning Algorithm for High Speed Machining of Micro Line Blocks Based on Cubic Polynomial Model

A New Linear Interpolation Method with Lookahead for High Speed Machining

Interpolation of Continuous Micro Line Segment Trajectories Based on Look-Ahead Algorithm in High-Speed Machining

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

The look-ahead function-based interpolation algorithm for continuous micro-line trajectories

The Look-ahead Based Adaptive Motion Control for High-Speed Machining of Complicated Contours

Local asymmetrical corner trajectory smoothing with bidirectional planning and adjusting algorithm for CNC machining

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Design and implementation of multi-axis real-time synchronous look-ahead trajectory planning algorithm

New Single Segment Acceleration and Deceleration Control Method Based on Cubic Polynomial Model

Research on Flexible Acceleration and Deceleration Method of NC System