Abstract:Purpose – The purpose of this paper is to build a flow stress model and microstructure evolution models which can be used to fulfill the multi-physics prediction of hot forging process, in this way the process design can be virtually verified and optimized. This is especially crucial for micro-alloyed steel forging which microstructure determines the component properties, since the downstream quenching is usually not needed. Design/methodology/approach – First, hot compression tests have been completed; second, experimental data are used to build the flow stress model and models for microstructure evolution; third, programming has been finished to integrate the proposed models into the commercial finite element method (FEM) code; fourth, case study is conducted to simulate multi-stage hot forging process of micro-alloyed steel F38MnV piston; and fifth, simulation results are validated by experiment. Findings – First, simulation results in grain size and phase volume fraction are in well agreement with experimental ones; second, the austenite grain is dramatically refined by the dynamic recrystallization in pre-forging process and static recrystallization in the two intervals has no obvious change during the following final forging and cooling above the Ae3 temperature; third, during the cooling process below the Ae3 temperature, ferrite and pearlite transformation begin from the thin skirt to the thick skirt and piston bottom because of different cooling speeds at different areas. Originality/value – First, flow stress model, dynamic recrystallization model, static recrystallization model, austenite grain growth model and phase transformation models are established for a micro-alloyed steel; second, the multi-physics FEM simulation of multi-stage hot forging of industrial piston has been conducted and verified by experiment, which show good agreement.

A Simple Online Modeling Approach for a Time-Varying Forging Process

Vertical Load Analysis of the Lifting Systems for Forging Manipulator During the Forging Process

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Accurate real-time modeling for multiple-blow forging

Computer Modeling of Property-controlled Forging Process for Heavy Forgings

A knowledge base model for complex forging die machining

Numerical Prediction on Microstructure Evolution for Multi-Stage Hot Forging of Micro-Alloyed Piston

Microstructural modeling and numerical simulation of multi-physical fields for martensitic stainless steel during hot forging process of turbine blade

Multi-Objective Optimization of Forging Process to Control the Microstructure and Damage of Material

Modeling And Virtual Reality Realization Of Coupled Processes In Integrated Open-Die Forging Plant

3D FEM simulation of multi-stage forging process using solid modeling of forging tools

Optimization of Multi-stage Forging Process Based on the Response Surface Methodology

Simulation of Programmed Incremental Open-Die Forging Processes Based on Spread Coefficient and Geometric Transformation

Mesoscale Simulation of Microstructure Evolution During Multi-Stage Hot Forging Processes

Modeling and Simulation of Austenite Grain Evolution for Heavy Forging Steel 30cr2ni4mov Undergoing Hot Deformation

Prediction of Microstructural Evolution During Hot Forging

Optimization of preform of high-speed multi-stage forging based on surrogate model methodology

A General Simulation Technology for Forging with Considering the Evolution of Voids, Grains and Cracks

Numerical Modeling and Anvil Design of High-Speed Forging Process for Railway Axles

An Overall Simulation of Austenite Grain Evolution for Heavy Forgings During Heating and Hot Deformation

Evaluating Interactions Between the Heavy Forging Process and the Assisting Manipulator Combining FEM Simulation and Kinematics Analysis