Abstract:Numerical simulations are crucial for predicting outcomes in forging processes but often neglect dynamic interactions within forming tools and presses. This study proposes an approach for achieving accurate real-time prediction of forging outcomes. Initially, a simulation-based surrogate model is developed to replicate key process characteristics related to the billet, enabling prediction of geometry, deformation field, and forging load after an upsetting operation. Subsequently, this model is integrated with a mass-spring-damper model representing the behavior of forging machine and tools. This integration enables the prediction of blow efficiency and energy distribution after each blow, including plastic, elastic, damping, and frictional energy of the upsetting operation. The approach is validated by comparing predictions with experimental results. The coupled model outperformed Finite Element Method (FEM) predictions, exhibiting mean absolute errors (MAE) below 0.1 mm and mean absolute percentage errors (MAPE) below 1% in geometry predictions. Deformation field predictions showed errors below 0.05 mm/mm, and load-displacement curves closely matched experimental data. Blow efficiency predictions aligned well with experimental results, demonstrating a mean absolute error below 1.1%. The observed energy distribution correlated with literature findings, underscoring the model's fidelity. The proposed methodology presents a promising approach for accurate real-time prediction of forging outcomes.

Simulation of Programmed Incremental Open-Die Forging Processes Based on Spread Coefficient and Geometric Transformation

Coordinated Kinematic Modelling for Motion Planning of Heavy-Duty Manipulators in an Integrated Open-Die Forging Centre

Analysis of Forging Compliance Process and Design of the Forging Simulator.

Compound stiffness modelling of an integrated open-die forging centre with serial–parallel heavy-duty manipulators

Modeling And Virtual Reality Realization Of Coupled Processes In Integrated Open-Die Forging Plant

3D FEM simulation of multi-stage forging process using solid modeling of forging tools

Optimisation of Pass Schedules for Flat-Tool Forging Based on Analytical Method

Numerical Simulations of Open-Die Forging Process for Manipulator Design

Numerical Simulation of GH4169 Alloy Disc Forging Process on Counterblow Hammer

Working Characteristics and Numerical Simulation of Forging Process for Clutch Screw Press

STUDY ON THE NUMERICAL SIMULATION OF MULTI-STAGE ROTARY FORGING OF A NON-AXISYMMETRIC PART AND THE CAE ANALYSIS OF THE DIE STRENGTH

Secondary Development of Finite Element Simulation Program and Experimental Verification of Multi-Step Continuous Forging

A Pass Planning Method for Multi-Hit Stretching of Heavy Forgings by Integration of a Semi-Analytical Technique and Degrees-Reduced Finite Element

3 D FEM Simulation of the Cross-Shaft Multi-Stage Forging Processes

Accurate real-time modeling for multiple-blow forging

3D FE Modeling Simulation of Cold Rotary Forging of a Cylinder Workpiece

Coupled Analysis and Application of Deformation Models in a Disk Forging Process

Computer aided preform design in forging using the inverse die contact tracking method

Dynamic Simulation of Forging Manipulator Based on Virtual Prototyping

INTEGRATED SIMULATION OF THE FORGING PROCESS FOR GH4738 ALLOY TURBINE DISK AND ITS APPLICATION

Reverse simulation using the simulation block technique and its application in the precision forging process