Abstract:Abstract The phenomenon of solidification cracking has been the subject of numerous research projects over the years. Great efforts have been made to understand the fundamentals of hot cracking. It is generally agreed that solidification cracks form in the solidification range between the liquidus and solidus temperatures under the combination of thermal, metallurgical and mechanical factors. There is still a need to determine the time‐resolved strain distribution in the crack‐sensitive region in order to analyse the local critical conditions for solidification cracking phenomena. This was a strong motivation for the development of a measurement system used in this study to estimate the local strains and strain rates in the zone where the solidification crack is expected to occur. The laser beam welding experiments were conducted using the Controlled‐Tensile‐Weldability test (CTW test) to apply an external strain condition during welding to generate solidification cracks. The CTW test is a test method for investigating the susceptibility of laser‐welded joints to solidification cracking, in which the sample can be subjected to a defined strain at a defined strain rate during welding. In combination with experimental investigations, numerical simulations provide spatially detailed and time‐dependent information about the strain development during the welding process, especially regarding the critical conditions for solidification cracking. Therefore, this tool was also used in the present study to evaluate the accuracy of measurement methods and to estimate experimentally derived values and their concrete influence on the formation of solidification cracks. By integrating experimental methods and numerical simulations, this study investigates the spatially resolved and temporally changing development of strain during welding, with a particular focus on the critical conditions that lead to the formation of solidification cracks. The use of numerical simulations serves a dual purpose by validating the accuracy of measurement methods and examining experimentally determined values for their actual influence on the formation of solidification cracks. A three‐dimensional finite element (FE) model implemented with ANSYS is used to simulate strains and stresses during welding. The credibility of the model was first established by validation using experimental temperature measurements. Subsequently, structural simulations were carried out under external load. The results of the simulations showed commendable agreement with the strain measurements performed using the developed technique.

Modeling of transport phenomena and solidification cracking in laser spot bead-on-plate welding of AA6063-T6 alloy. Part II—simulation results and experimental validation

Modeling of transport phenomena and solidification cracking in laser spot bead-on-plate welding of AA6063-T6 alloy. Part I—the mathematical model

Analysis of Solidification Cracking Susceptibility in Side-by-side Dual-Beam Laser Welding of Aluminum Alloys

Modelling and Optimization of Continual Laser Joining Processes for Silicon Aluminum Alloy in Microwave Devices

Mechanical Constraint Intensity Effects on Solidification Cracking During Laser Welding of Aluminum Alloys

Coupled thermal-mechanical-contact analysis of hot cracking in laser welded lap joints

Investigation of microstructure evolution on different planes in laser welding of aluminum alloy

Interfacial instability and microstructural growth due to rapid solidification in laser processing

Three-Dimensional Numerical Simulation of Weld Solidification Cracking

Modeling and Simulation of Laser Welding for Aluminium Alloy

Multi-scale Simulation of Grain/sub-Grain Structure Evolution During Solidification in Laser Welding of Aluminum Alloys

Multi-scale Three-Dimensional Simulation of the Solidification Microstructure Evolution in Laser Welding of Aluminum Alloys under Dynamic Spatial Thermal Cycling

Determination of critical local straining conditions for solidification cracking at laser beam welding by experimental and numerical methods

An Analytical Model for Prediction of Solidification Cracking Susceptibility in Aluminum Alloys Taking into Account the Effect of Solidification Rate

Multi-physics multi-scale simulation of the solidification process in the molten pool during laser welding of aluminum alloys

3-D Numerical Simulation of Driving Force of Weld Solidification Cracking in Stainless Steel Thick Plate

Heat transfer and fluid flow and their effects on the solidification microstructure in full-penetration laser welding of aluminum sheet

Prediction of the influence of welding metal composition on solidification cracking of laser welded aluminum alloy

Physics-driven Modeling of Electron Beam Welding of Al-Cu Alloys from Molten Pool Flow, Microstructure to Mechanical Properties

Multi-scale Simulation of Solidification Behavior and Microstructure Evolution During Vacuum Electron Beam Welding of Al-Cu Alloy

Numerical Modeling of Welding Porosity Formation and Dendrite Growth of 6xxx Aluminum Alloys