Abstract:Atomic force microscopy (AFM) tip-based nanofabrication is as a powerful method to machine nanostructures. However, the traditional AFM scratching process suffers from low processing efficiency and a low rate of material removal. Thus, an AFM tip-based nanomilling method was previously proposed to improve the machining efficiency and material removal rate; however, the machining mechanism of the nanomilling process, especially on hard-brittle silicon crystals, is not well understood. In this study, we used an AFM tip-based nanomilling approach to machine nanochannels on single-crystal silicon to investigate the machining mechanism (i.e., the material removal state, undeformed chip thickness, the brittle-to-ductile transition, and subsurface damage). For the first time, we established a theoretical model for tip-based nanomilling with a constant normal load to predict the machined depth. Nanochannels fabricated with a wide range of feed directions, crystal orientations, and tip trajectories were obtained, which provided a reference for machining high-quality nanochannels and an in-depth understanding of the nanomilling of single-crystal silicon. The experimental results demonstrated that we could machine a nanochannel without pile-ups by selecting a specific trajectory with a feed smaller than 4 nm in the 0 degrees direction, a normal load no greater than 120 mu N, and a crystal orientation at rotation angles of 135 degrees, 157.5 degrees, or 180 degrees. Moreover, transmission electron microscope analysis of the subsurface of the nanochannel revealed a large number of dislocations, stacking faults, and a layer of amorphous silicon. Our findings are of great significance for obtaining high-quality nanochannels with a predicable machined depth and understanding the nanomilling mechanism of hard-brittle materials.

Machining Slight Burr Formed Micro-Channels with Different Moving Trajectories of a Pyramidal Diamond Tip

Study on the micro-machining process with a micro three-sided pyramidal tip and the circular machining trajectory

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Trochoid-path-based FEM Simulation for High-Speed Milling of Aluminum Alloy

Burr Formation and Surface Roughness Characteristics in Micro-Milling of Microchannels

Processing Outcomes of the AFM Probe-Based Machining Approach with Different Feed Directions

Study on Material Removal for Nanochannels Fabrication Using Atomic Force Microscopy Tip-Based Nanomilling Approach

Improvement in Surface Quality of Microchannel Structures Fabricated by Revolving Tip-Based Machining

Finite Element Analysis of Revolving Tip-Based Cutting Process

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Study on the Effects of Feed Directions on Chip Formation and Machined Depth when Implementing Nanoscratching by Nanomilling Approach

Study on the Effects of Processing Parameters on Machining Outcomes under AFM Tip-Based Nanomilling Approach

Burr Formation Mechanism of Ultraprecision Cutting for Microgrooves on Nickel Phosphide in Consideration of the Diamond Tool Edge Radius

Towards Understanding the Machining Mechanism of the Atomic Force Microscopy Tip-Based Nanomilling Process

Studying the Effects of Cutting Parameters on Burr Formation and Deformation of Hierarchical Micro-Structures in Ultra-Precision Raster Milling

Investigation on Finishing Mechanism and Modelling on Material Removal for Abrasive Flow Machining Micro-Channels with Asperity Surface

Fabrication of millimeter scale nanochannels using the AFM tip-based nanomachining method

Effects of ultrasonic vibration cutting trajectories on chip formation of tungsten alloys

Design of a Template-Based Electrophoretically Assisted Micro-Ultrasonic Machining Micro-Channel Machine Tool and Its Machining Experiment

Modulated Vibration Texturing of Hierarchical Microchannels with Controllable Profiles and Orientations

Effect of the Inclined Angle of Micromilling Tool on the Fabrication of the Microfluidic Channel