Abstract:The utilization of near-infrared lasers (approximately 1000 nm wavelength) on non-ferrous metals often presents challenges like unstable weld pools, suboptimal weld formation, and reduced mechanical performance due to high reflectivity. This investigation focused on dissimilar Cu/Ti materials undergoing coaxial welding with a near-infrared fiber laser (λ = 1080 nm) and a blue diode laser (λ = 455 nm) at various power ratios. The study centered on analyzing molten pool characteristics, microstructure, and mechanical properties of weld. The combination 1080/455 nm wavelength of lasers expanded the heating range along the weld seam, enhancing Keyhole stability and dynamic stability of molten pool. Increasing the power ratio of the 455 nm wavelength laser reduced temperature gradients in the molten pool, resulting in superior-quality joint with a maximum tensile strength of 245.93 MPa, surpassing that of the Cu base material. Interface analysis revealed that, while there was no significant variance in the phase composition of the Ti-side, augmenting the power ratio of the 455 nm wavelength laser increased post-heating during welding process, reducing low-angle grain boundaries in the Ti-side fusion zone from 58.3 % to 48.3 %. This enhanced distribution patterns for low-angle grain boundaries and geometrically necessary dislocations, optimizing stress distribution. The absorption of 455 nm wavelength laser energy by Cu results in molten pools that spread towards the Cu-side regions. This process causes a change in composition from TiCu2 to TiCu4 in the fusion area, aided by exceptional thermal conductivity, resulting in increased cooling rates and undercooling levels. This grain refinement improved resistance against dislocation generation, enhancing strength and plasticity. This study demonstrates the feasibility of achieving high-quality welding between Cu/Ti dissimilar materials using a coaxial hybrid beam with a wavelength of λ = 1080/455 nm, offering an innovative solution for laser welding of highly reflective materials.

Laser Micro-Welding of Cu-Al Dissimilar Metals

Dissimilar Metal Laser Beam Welding Between Aluminum and Copper

Laser Micro-Joining of Al and Cu Foils with High Strength and Ductility

10.1063/1.5084134.2

Study on weld formation and segregation mechanism for dissimilar pulse laser welding of NiTi and Cu wires

Interface Microstructure and Fracture Behavior of Single/dual-Beam Laser Welded Steel-Al Dissimilar Joint Produced with Copper Interlayer

Blue Laser Conduction Welding of Dissimilar Cu and Al Sheets

Laser pressure welding of dissimilar aluminium and copper: microstructure and mechanical property

Effect of Cu Content on Microstructure Transformation and Mechanical Properties of Fe-Al Dissimilar Laser Welded Joints

Effect of different pulse shapes on the laser welding of aluminum and copper

Microstructure and mechanical properties of Al/Cu dissimilar metals pulsed DE-MIG welding-brazing joint

Dissimilar Laser Welding of Superelastic NiTi and CuAlMn Shape Memory Alloys

Dissimilar laser welding of NiTi shape memory alloy and copper

Study on laser welding of Cu/Ti dissimilar materials using a hybrid light source with wavelengths of 455/1080 nm

Effect of Cu/Ni Foil Interlayer on Microstructure and Mechanical Properties of Laser Welded Aluminum/steel Joints

Hybrid Laser Welding and Brazing for Controlling Intermetallic Compounds in Al/Cu Dissimilar Joint

Laser beam welding of dissimilar materials

Effect of Laser Positioning on the Microstructure and Properties of NiTi-Copper Dissimilar Laser Welds

Dissimilar welding between Cu–6Al–2Ni alloy and stainless steel 316L using continuous ytterbium YAG laser

Mechanism of Laser Welding on Dissimilar Metals Between Stainless Steel and W-Cu Alloy

Microstructural Characteristics of a Stainless Steel/Copper Dissimilar Joint Made by Laser Welding