ChemInform Abstract: Porous Copper Catalyzed Click Reaction in Water.

Chen Zhang,Bo Huang,Ying Chen,Dong‐Mei Cui

DOI: https://doi.org/10.1002/chin.201405129

2014-01-01

ChemInform

Abstract:AbstractA very efficient, green, and sustainable one‐pot synthesis of triazoles is developed.

What problem does this paper attempt to address?

Porous Copper Catalyzed Click Reaction in Water

Chen Zhang,Bo Huang,Ying Chen,Dong-Mei Cui

DOI: https://doi.org/10.1039/c3nj00468f

IF: 3.3

2013-01-01

New Journal of Chemistry

Abstract:1,2,3-Triazoles were synthesized in water using a cheaper, simple and easily recyclable heterogeneous porous Cu catalyst via one-pot multi component reaction. The catalyst can be recycled five times without significant loss of its catalytic activity.
Copper-Mediated Sequential C–N and N–N Bond Formation: Facile Synthesis of Symmetrical 1,2,4-Triazoles

Zhonglian Li,Zhiguo Zhang,Wei Zhang,Qingfeng Liu,Tongxin Liu,Guisheng Zhang

DOI: https://doi.org/10.1055/s-0033-1338985

2013-01-01

Synlett

Abstract:Via a one-pot process, catalyzed by Cu(OAc)(2), a series of 3,5-disubstituted 4H-1,2,4-triazoles was conveniently and efficiently synthesized by using low-toxicity, stable, readily available, inexpensive amidine hydrochloride.
ChemInform Abstract: Copper(I) Oxide and Benzoic Acid “on Water”: A Highly Practical and Efficient Catalytic System for Copper(I)‐Catalyzed Azide—Alkyne Cycloaddition.

Changwei Shao,Rui Zhu,Shaobo Luo,Qun Zhang,Xinyan Wang,Yuefei Hu

DOI: https://doi.org/10.1002/chin.201143119

2011-01-01

ChemInform

Abstract:Pre‐prepared copper(I) carboxylates are not necessary for the process, since they can be replaced by a combination of cheap, stable Cu 2 O and carboxylic acid.
An air-stable supported Cu(І) catalyst for azide-alkyne click polymerization

Haiqiang Wu,Wenhui Dong,Zongtan Wang,Bicheng Yao,Ming Chen,Jingzhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-015-5475-x

2015-01-01

Abstract:An air-stable supported Cu(I) catalyst, CuI@PS-Phen, was designed and synthesized. CuI@PS-Phen can efficiently catalyze the click polymerization of diynes a and diazides b to produce soluble and thermally stable polytriazoles with high molecular weights ( M w up to 30800), and low copper residue content (down to 190 ppm) in high yields (up to 94.2%) under mild reaction conditions without the exclusion of oxygen.
Tetraamminecopper(II) Sulfate Monohydrate in Oxidative Azide-olefin Cyclo-addition and Three-component Click Reaction

Jasmin Sultana,Diganta Sarma

DOI: https://doi.org/10.2174/1570179417666191223152643

Abstract:Introduction: An effective Cu-complex, [Cu(NH3)4SO4 • H2O] was prepared conveniently from the inexpensive and easily available starting reagents in a simple route. Materials and methods: Excellent reactivity of the catalyst was observed towards two competent clickcycloadditions: (a) oxidative cycloaddition of azides with electron-poor olefins and (b) one-pot cycloaddition of alkynes with boronic acid and sodium azide under "click-appropriate" conditions. Results: No external oxidant, short reaction time, high product yield, wide substrate scope, and aqueous solvent media make the azide-olefin cycloaddition approach a greener route in contrast to the reported methods. Conclusion: The newly developed mild, green, and rapid three-component strategy shows product diversity with superb yields at room temperature by reducing the synthetic process time and using only 1 mol % of the synthesized copper complex.
A Recyclable and Reusable Supported Cu(I) Catalyzed Azide-Alkyne Click Polymerization.

Haiqiang Wu,Hongkun Li,Ryan T K Kwok,Engui Zhao,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1038/srep05107

IF: 4.6

2014-01-01

Scientific Reports

Abstract:The azide-alkyne click polymerization (AACP) has emerged as a powerful tool for the synthesis of functional polytriazoles. While, for the Cu(I)-catalyzed AACP, the removal of the catalytic Cu(I) species from the resulting polytriazoles is difficult, and the research on the recyclability and reusability of the catalyst remains intact. Herein, we reported the first example of using recyclable and reusable supported Cu(I) catalyst of CuI@A-21 for the AACP. CuI@A-21 could not only efficiently catalyze the AACP but also be reused for at least 4 cycles. Moreover, pronounced reduction of copper residues in the products was achieved. Apart from being a green and cost-effective polymer synthesis strategy, this method will also broaden the application of AACP in material and biological sciences and provide guidelines for other polymerizations with metal catalysts.
Copper(I)‐Catalyzed Intramolecular N‐N Coupling of Cyclopropyl O‐Acyl Ketoximes: Synthesis of Spiro‐fused Pyrazolin‐5‐ones

Zhiguo Zhang,Junlong Li,Guoqing Huang,Kai Sun,Guisheng Zhang,Nana Ma,Qingfeng Liu,Tongxin Liu

DOI: https://doi.org/10.1002/cjoc.201600479

IF: 5.56

2016-01-01

Chinese Journal of Chemistry

Abstract:A convenient copper-catalyzed approach has been developed for the synthesis of substituted spiro-fused pyrazolin-5-ones from readily available cyclopropyl O-acyl ketoximes via an intramolecular N-N bond formation reaction. These catalytic reactions proceed in excellent yields with a broad scope.
ChemInform Abstract: Copper(I)‐Catalyzed Three‐Component Coupling of N‐Tosylhydrazones, Alkynes and Azides: Synthesis of Trisubstituted 1,2,3‐Triazoles.

Zhikun Zhang,Qi Zhou,Fei Ye,Ying Xia,Guojiao Wu,Mohammad Lokman Hossain,Yan Zhang,Jianbo Wang

DOI: https://doi.org/10.1002/chin.201546158

2015-01-01

ChemInform

Abstract:AbstractA wide range of 1,2,3‐triazoles are efficiently and highly regioselectively obtained from simple starting materials by combination of a click reaction with a copper carbene migratory insertion process.
In situ prepared CuI nanoparticles on modified poly(styrene-co-maleic anhydride): an efficient and recyclable catalyst for the azide–alkyne click reaction in water

Elaheh Hashemi,Yahya S. Beheshtiha,Shervin Ahmadi,Majid M. Heravi

DOI: https://doi.org/10.1007/s11243-014-9838-5

2014-05-30

Transition Metal Chemistry

Abstract:A facile, high-yielding and straightforward methodology for the copper-catalyzed synthesis of 1,4-disubstituted 1,2,3-triazoles in water, using in situ prepared copper nanoparticles (NPs) on modified poly(styrene-co-maleic anhydride) [SMA] catalyst, is reported. The polymer support was easily prepared from the reaction of SMA with 4-aminopyridine and subsequently underwent reaction with CuI NPs. The catalyst was applied for the preparation of triazoles under air, followed by chromatographic separation of the products. The polymer-supported catalyst not only showed high catalytic activity but also showed high 1,4-regioselectivity for the [3 + 2] Huisgen cycloaddition in water as solvent. The products were obtained in good to excellent yields in all cases. The catalyst can be used without pre-activation and reloaded for at least five runs without significant decrease in its activity. The catalyst was characterized by SEM, energy dispersive spectroscopy analysis of X-rays, and inductively coupled plasma.

chemistry, inorganic & nuclear
Mechanisms, Copper Catalysts, and Ligands Involved in the Synthesis of 1,2,3- Triazoles Using Click Chemistry

Elisa Leyva,Edgar Moctezuma,Saúl Noriega,Irving Rubén Rodríguez-Gutiérrez

DOI: https://doi.org/10.2174/1385272827666230201103825

2023-02-17

Current Organic Chemistry

Abstract:In the last two decades, click chemistry has become a modular synthetic procedure to assemble new molecular structures. It is a powerful methodology that relies on the construction of carbon-heteroatom bonds of a variety of reactants. In modern synthetic chemistry, it has been applied in a large number of applications, from pharmaceutical to material science. The copper-catalyzed 1,2,3-triazole preparation, reacting organic azides with alkynes, has become the star of click chemistry due to its reliability and biocompatibility. As a consequence, this reaction has found many applications in diverse areas such as bioconjugation, material science, and drug discovery. In order to understand the effect of copper catalysts and ligands in click chemistry, it is important to understand the structural and mechanistic aspects involved. In this review, several physicochemical aspects of click chemistry are discussed. First, the mechanisms and intermediates involved in the preparation of 1,2,3-triazoles. Second, the different types of copper catalysts are used to perform the reaction regioselectively. The last section shows the structure and characteristics of effective ligands utilized to improve click chemistry under different experimental conditions.

chemistry, organic
ChemInform Abstract: Copper‐Catalyzed Three‐Component One‐Pot Synthesis of Quinazolines.

Jia Ju,Ruimao Hua,Ji Su

DOI: https://doi.org/10.1002/chin.201312150

2013-01-01

ChemInform

Abstract:AbstractTwo efficient approaches to multi‐substituted quinazolines are presented both using aqueous ammonia as nitrogen source.
ChemInform Abstract: Quick and Highly Efficient Copper‐Catalyzed Cycloaddition of Aliphatic and Aryl Azides with Terminal Alkynes “on Water”.

Feng Wang,Hua Fu,Yuyang Jiang,Yufen Zhao

DOI: https://doi.org/10.1002/chin.200833143

2008-01-01

ChemInform

Abstract:AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.
ChemInform Abstract: Copper‐Catalyzed Multicomponent Reaction: Facile Access to Novel Phosphorus Amidines.

Sun‐Liang Cui,Jing Wang,Yan‐Guang Wang

DOI: https://doi.org/10.1002/chin.200835160

2008-01-01

ChemInform

Abstract:AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.
Highly efficient azide-alkyne cycloaddition over CuI-modified covalent triazine frameworks in water

Qing Huang,Jia-Jun Zhu,Ling Song,Ping Shang,Xuan-Feng Jiang

DOI: https://doi.org/10.1016/j.micromeso.2022.112261

IF: 5.876

2022-11-01

Microporous and Mesoporous Materials

Abstract:The synthesis of novel porous polymeric materials with active coordinating motifs is one of the most interesting topics in the field of heterogeneous catalysis and materials chemistry. This study adopts a post-modification strategy to construct three CuI-modified covalent triazine frameworks with different micropores. Bipyridine coordination sites are formed in the porous polymeric structures when the monomers are polymerized into covalent triazine frameworks. Cuprous iodide is uploaded into the skeleton via Cu–N/Cu–I cooperative coordination and forms a metal catalytic site. Furthermore, the uniformly anchored [(N^N) CuI] metal catalytic site donates CTFs to catalyze the azide-alkyne cycloaddition reaction in an aqueous solution, with high efficiency, excellent tolerance (>70% isolated yield for seven examples), and good recyclability, at room temperature.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
ChemInform Abstract: Copper Catalyzed Synthesis of 1‐aryl‐1,2,3‐triazoles from Aryl Iodides, Alkynes, and Sodium Azide.

Ying Chen,Zi‐Jian Zhuo,Dong‐Mei Cui,Chen Zhang

DOI: https://doi.org/10.1002/chin.201431135

2014-01-01

ChemInform

Abstract:AbstractThe catalyst is reused five times with slightly decreasing yields.
Copper-Catalyzed Synthesis of 4-CF3-1,2,3-Triazoles: An Efficient and Facile Approach via Click Reaction

Tinghong Tang,Cuiting Chen,Xin Fu,Huilan Xu,Luyong Wu,Wenhao Chen

DOI: https://doi.org/10.3390/molecules29061191

IF: 4.6

2024-03-08

Molecules

Abstract:Incorporation of a trifluoromethyl group with 1,2,3-triazoles motifs was described. We explored a click reaction approach for regioselective synthesis of 1-susbstituted-4-trifluoromethyl-1,2,3-triazoles in which 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) reacts with commercial 2-bromo-3,3,3-trifluoropropene (BTP) to form 3,3,3-trifloropropyne (TFP) in situ. Arising from merits associated with the availability and stability of BTP, and the high efficiencies of CuI/1,10-Phenanthroline (Phen)-catalyzed cycloaddition reactions of azides with alkynes, this readily performed click process takes place to form the target 1,2,3-triazoles in high yields, and with a wide azide substrate scope. The potential value of this protocol was demonstrated by its application to a gram-scale reaction.

chemistry, multidisciplinary,biochemistry & molecular biology
Copper nanoparticles doped in wrinkled fibrous nanosilica as an efficient catalyst for the synthesis of 1,4-disubstituted 1,2,3-triazole in aqueous solution

Mahsa Anvari,Nasrin Shadjou

DOI: https://doi.org/10.1007/s00706-021-02829-0

2021-08-24

Abstract:A one-pot, highly efficient procedure was reported for the synthesis of 1,4-disubstituted 1,2,3-triazoles in water as a green solvent using Cu@KCC-1-NH-CS2 as a novel nanoreactor. Different methods such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and adsorption/desorption analysis (BET equation) have been used for the characterization of engineered nanocatalyst. High surface area (133 m2 g−1) and porous structure of the nanocatalyst, excellent catalytic performance in ecofriendly and green solvent with very short reaction times (5–20 min), easy work up, no use of toxic solvents, and suitable reusability of the catalyst are advantages of this presented work.Graphic abstract
Recyclable Cu nanoparticle catalyzed azide-alkyne click polymerization

Yizhao Chen,Benzhao He,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-019-9465-7

2019-01-01

Science China Chemistry

Abstract:The Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC) has been developed into a powerful polymerization reaction for the synthesis of new polytriazoles with versatile properties. However, research on recyclable and reusable copper catalyst for click polymerization to meet the requirement of green chemistry was rarely reported. Copper nanoparticles were reported to be capable catalysts for CuAAC. Replacing conventional copper catalyst with copper nanoparticles may realize the recycle and reuse of the copper catalyst in click polymerization. In this paper, copper nanoparticles were prepared and used as an effective catalyst for click polymerization, and soluble polytriazoles with high molecular weights were obtained in excellent yields under optimized reaction conditions. Importantly, the copper nanoparticles can be recycled and reused for up to 11 times for the click polymerization. Moreover, introducing aggregation-induced emission (AIE)-active moiety of tetraphenylethylene into the monomers makes the resultant polymers retain the AIE feature. This work not only provides an efficient recyclable catalytic system for the azide-alkyne click polymerization, but also might inspire polymer chemists to use recyclable copper species to catalyze other polymerizations.
Green Biosynthesis of Copper Oxide Nanoparticles Using Waste Colocasia esculenta Leaves Extract and Their Application as Recyclable Catalyst Towards the Synthesis of 1,2,3-triazoles

Kailash Barman,Prantu Dutta,Devasish Chowdhury,Pranjal K. Baruah

DOI: https://doi.org/10.1007/s12668-021-00826-5

2021-01-18

BioNanoScience

Abstract:Generation of value-added materials from waste product is in high demand for sustainable chemistry. In order to reduce the use of toxic chemicals in the synthesis of metal nanoparticles, alternative green methods are in demand. Herein, we report the synthesis of copper oxide nanoparticles from plant extract of Colocasia esculenta leaves which is thrown as waste after cultivation. The synthesized nanoparticle was characterized using UV, FT-IR, EDX, TEM, AAS, DLS, and XPS. The synthesized nanoparticles were used as heterogenous catalyst for carrying out the click reaction of azide and alkyne. The catalyst showed good catalytic activity for the synthesis of various 1,2,3-triazoles with very low catalyst loading (0.535 mol% of copper) giving excellent yield of various triazoles. The catalyst could be easily separated from the reaction medium and recycled several times without losing much catalytic activity. The catalyst showed good TON (177.6) and TOF (29.6 h−1) for the optimized reaction. Thus, the method has several advantages such as synthesis of the nanoparticle from cheap sources (plant extract of waste Colocasia esculenta leaves), use of the water as environmentally benign solvent for carrying out the click reaction, one-pot reaction, low catalyst loading, recyclability of catalyst, and high yield of 1,2,3-triazole products.
A Highly Efficient Single-Chain Metal Organic Nanoparticle Catalyst for Alkyne-Azide "click" Reactions in Water and in Cells

Yugang Bai,Xinxin Feng,Hang Xing,Yanhua Xu,Boo Kyung Kim,Noman Baig,Tianhui Zhou,Andrew A. Gewirth,Yi Lu,Eric Oldfield,Steven C. Zimmerman

DOI: https://doi.org/10.1021/jacs.6b04477

IF: 15

2016-01-01

Journal of the American Chemical Society

Abstract:We show that copper-containing metal organic nanoparticles (MONPs) are readily synthesized via Cu(II)-mediated intramolecular cross-linking of aspartate-containing polyolefins in water. In situ reduction with sodium ascorbate yields Cu(I)-containing MONPs that serve as highly efficient supramolecular catalysts for alkyne azide "click chemistry" reactions, yielding the desired 1,4-adducts at low parts per million catalyst levels. The nanoparticles have low toxicity and low metal loadings, making them convenient, green catalysts for alkyne azide "click" reactions in water. The Cu-MONPs enter cells and perform efficient, biocompatible click chemistry, thus acting as intracellular nanoscale molecular synthesizers.

ChemInform Abstract: Porous Copper Catalyzed Click Reaction in Water.

Porous Copper Catalyzed Click Reaction in Water

Copper-Mediated Sequential C–N and N–N Bond Formation: Facile Synthesis of Symmetrical 1,2,4-Triazoles

ChemInform Abstract: Copper(I) Oxide and Benzoic Acid “on Water”: A Highly Practical and Efficient Catalytic System for Copper(I)‐Catalyzed Azide—Alkyne Cycloaddition.

An air-stable supported Cu(І) catalyst for azide-alkyne click polymerization

Tetraamminecopper(II) Sulfate Monohydrate in Oxidative Azide-olefin Cyclo-addition and Three-component Click Reaction

A Recyclable and Reusable Supported Cu(I) Catalyzed Azide-Alkyne Click Polymerization.

Copper(I)‐Catalyzed Intramolecular N‐N Coupling of Cyclopropyl O‐Acyl Ketoximes: Synthesis of Spiro‐fused Pyrazolin‐5‐ones

ChemInform Abstract: Copper(I)‐Catalyzed Three‐Component Coupling of N‐Tosylhydrazones, Alkynes and Azides: Synthesis of Trisubstituted 1,2,3‐Triazoles.

In situ prepared CuI nanoparticles on modified poly(styrene-co-maleic anhydride): an efficient and recyclable catalyst for the azide–alkyne click reaction in water

Mechanisms, Copper Catalysts, and Ligands Involved in the Synthesis of 1,2,3- Triazoles Using Click Chemistry

ChemInform Abstract: Copper‐Catalyzed Three‐Component One‐Pot Synthesis of Quinazolines.

ChemInform Abstract: Quick and Highly Efficient Copper‐Catalyzed Cycloaddition of Aliphatic and Aryl Azides with Terminal Alkynes “on Water”.

ChemInform Abstract: Copper‐Catalyzed Multicomponent Reaction: Facile Access to Novel Phosphorus Amidines.

Highly efficient azide-alkyne cycloaddition over CuI-modified covalent triazine frameworks in water

ChemInform Abstract: Copper Catalyzed Synthesis of 1‐aryl‐1,2,3‐triazoles from Aryl Iodides, Alkynes, and Sodium Azide.

Copper-Catalyzed Synthesis of 4-CF3-1,2,3-Triazoles: An Efficient and Facile Approach via Click Reaction

Copper nanoparticles doped in wrinkled fibrous nanosilica as an efficient catalyst for the synthesis of 1,4-disubstituted 1,2,3-triazole in aqueous solution

Recyclable Cu nanoparticle catalyzed azide-alkyne click polymerization

Green Biosynthesis of Copper Oxide Nanoparticles Using Waste Colocasia esculenta Leaves Extract and Their Application as Recyclable Catalyst Towards the Synthesis of 1,2,3-triazoles

A Highly Efficient Single-Chain Metal Organic Nanoparticle Catalyst for Alkyne-Azide "click" Reactions in Water and in Cells